-
GI-S50 Series 50mm Huosing Solid Shaft Increm···
GIS-50 Series incremental encoder is is an easy-to-install incremental encoder with the options of NPN/PNP open collector, HTL, TTL outputs and an extended resolution up to 30000ppr;The gearing of the encoder is from NMB, can enable the encoder movement smoothfully and long work life. It can provide 1 singnal A, 2 singnals A/B, 3 singnals A/B/Z, and 6 singals A/B/Z/A-/B-/Z- for TTL and HTL , And are equivalent with Omron Incremental encoder E6C2 Series(E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,E6C2-CWZ3E, E6C2-CBZ5C;); Koyo incremental TRD-S Series, Automics ES50 Series incremental encoder.
-
GI-S40 Series 40mm Housing Solid Shaft Increm···
GIS-40 Series incremental encoder is is an easy-to-install, incremental encoder with the options of NPN/PNP open collector, Push pull, Line Driver outputs and an extended resolution up to 10000ppr;GIS-40 Incremental encoder is 38mm housing, small size encoder, it can manage the users install it in a limited space; The gearing of the encoder is from NMB, can enable the encoder movement smoothfully and long life.
-
Profinet EtherNet Encoder
Model No.: GMA-S5810-1213-B4PELP SeriesProfinet implements the interfacing to peripherals.[1][2] It defines the communication with field connected peripheral devices. Its basis is a cascading real-time concept. Profinet defines the entire data exchange between controllers (called “IO-Controllers”) and the devices (called “IO-Devices”), as well as parameter setting and diagnosis. IO-Controllers are typically a PLC, DCS, or IPC; whereas IO-Devices can be varied: I/O blocks, drives, sensors, or actuators. The Profinet protocol is designed for the fast data exchange between Ethernet-based field devices and follows the provider-consumer model.[1] Field devices in a subordinate Profibus line can be integrated in the Profinet system seamlessly via an IO-Proxy (representative of a subordinate bus system).(From Wikipedia)
-
GS-SVZ35 Series Servo Motor Encoder
Internal use of ASIC devices, high reliability, long life, strong anti-interference.The taper shaft is designed to be easy to slip, with small installation volume, wide resolution range, no signal regulation is required, with A B Z U V W six channel signal output, which can be connected with standard line drive (26LS31) RS422, can provide 12 output signals, compatible with TTL;
-
GE-A Series Sine/ Cosine Output Signals Gear ···
The GE-A Gear Type Encoders are non-contact incremental encoders for rotary speed and position measurement. Based on Gertech’s unique Tunneling Magnetoresistance (TMR) sensor technology, they provide orthogonal differential sin/cos signals with high quality, along with an index signal and their inverse signals. The GE-A series are designed for 0.3~1.0-module gears with different teeth numbers.
