GE-A Series Sine/ Cosine Output Signals Gear Type Encoder
| Category | Parameter |
|---|---|
| Applications | - Rotary position and speed sensing in CNC machines - Energy and power generation systems - Railway equipment - Elevators |
| Product Description | The GE-A series gear-type encoders are non-contact incremental encoders designed for rotary speed and position measurement, based on Gertech’s TMR sensor technology, outputting high-quality sine/cosine signals along with index signals. |
| Features | - Output signal amplitude: 1Vpp ± 10% - High-frequency response: 1MHz - Operating temperature: -40°C ~ 100°C - IP68 protection grade |
| Advantages | - Fully sealed metal housing providing the highest protection level - Non-contact measurement, abrasion and vibration-free, can work in harsh environments such as water, oil, or dust - Weak magnetic induction prevents gear magnetization |
| Electrical Parameters | Vcc: 5±10%V Lout: ≤20mA Vout: sin/cos (1Vpp±10%) Fin/Fout: ≤1MHz Phase: 90°±5% |
| Electrical Details | Calibration Method: Manual Insulation Resistance: 10MΩ (DC500V) Withstand Voltage: AC500V for 1 minute EMC Pulse: 4000V |
| Mechanical Parameters | D (Mounting Hole Distance): 27mm Gap (Mounting Air-gap): 0.2/0.3/0.5mm Tol (Mounting Tolerance): ±0.05mm P (Protection Grade): IP68 |
| Operating Temperature | -40°C ~ 100°C |
| Storage Temperature | -40°C ~ 100°C |
| Housing Material | Zinc alloy housing, fully potted |
| Recommended Gear Parameters | Gear Module: 0.3~1.0mm Number of Teeth: 128, 256, 512 (Recommended) Material: Ferromagnetic steel (Recommended 45# steel) Tooth Shape: Concave/Convex |
| Gear Parameter Calculation | The GE-A product series is designed for gears with a module of 0.3~1.0mm, with no limit on the number of teeth. Recommended number of teeth is 128, 256, or 512. |
| Output Signals | - A/B Signals: Orthogonal differential sine/cosine signals - Z Signal: Index signal - Output signals: A+/A-/B+/B-/Z+/Z- |
| Output Signal Details | A/B signals are orthogonal differential sine/cosine signals, and the Z signal is the index signal with high-quality output waveforms. |
| Installation Procedure | 1. Mount the encoder with two M4 screws, but do not tighten them completely. 2. Use a feeler gauge to adjust the mounting air-gap and ensure the gap is within tolerance. 3. Tighten the screws and remove the feeler gauge. |
| Cable | Standard version: 8 twisted-pair shielded wires, lengths: 1m, 3m, 5m Enhanced version: 10 twisted-pair shielded wires, lengths: 1m, 3m, 5m |
| Dimensions | (Specific dimensions and graphical descriptions required) |
| Order Code | GE-A-Series-Gear-type-encoder-19 1: Gear Type 2: Gear Module (e.g., 0.4, 0.5) 3: Signal Type (A: Sine/Cosine) |
| Order Code Details | 4: Interpolation (1 is default) 5: Index Tooth Shape (F: Concave, M: Convex) 6: Number of Teeth (128, 256, 512, XXX) 7: Cable Length (1m, 3m, 5m) 8: Online Debug (1: Supported, 0: Not Supported) |
| Remarks | Specifications and parameters may be subject to change. Gertech reserves the right to modify the product. Customers use this product at their own risk, and Gertech is not responsible for any damages arising from its use. |
