page_head_bg

GMA-PL Series Parallel Multiturn Absolute Encoder

GMA-PL Series Parallel Multiturn Absolute Encoder

short description:

The GMA-PL Series parallel Multi turn absolute encoder is ideal for a wide variety of industrial applications that require an encoder with the capability of absolute positioning output. Its fully digital output technology make it an excellent choice for all applications, especially ones with a high presence of noise. Available with either round servo or square flange mounting, and a variety of connector and cabling options, GSA-PL Series is easily designed into a variety of application requirements. With its wide selection of shaft sizes supported by industrial grade, NMB bearings,and its optional IP67 seal, it is ideal for tough environments.Housing Dia.:38,50,58mm;Solid/hollow Shaft Diameter:6,8,10mm; Resolution:Max.29bits Interface: Parallel; Output Code: Binary, Gray, Gray Excess, BCD;


Housing Dia.:38,50,58mm

Solid/Hollow Shaft Dia.:6,8,10mm

Interface:Parallel

Resolution:Max.16bits Turns, Single turn max.16bits, Total Max.29bits;

Supply Voltage:5v,8-29v;

Output Code:Binary, Gray, Gray Excess, BCD;


Product Detail

CategoryDetails
Product NameGMA-PL Series Parallel Multiturn Absolute Encoder
Product TypeParallel Multiturn Absolute Encoder
Ideal ForIndustrial applications requiring absolute positioning output
Output TechnologyFully digital output, ideal for noise-prone environments
Mounting OptionsRound servo or square flange
Connector/CablingVarious options
BearingsIndustrial-grade NMB bearings
IP RatingOptional IP67 seal
Housing Diameter38mm, 50mm, 58mm
Shaft DiameterSolid/hollow Shaft: 6mm, 8mm, 10mm
ResolutionMax. 29 bits (Single turn max. 16 bits)
InterfaceParallel
Output CodeBinary, Gray, Gray Excess, BCD
Supply Voltage5V, 8-29V
Application FieldsMachinery manufacturing, shipping, textile, printing, aviation, military, testing machines, elevators, etc.
Vibration & Corrosion ResistanceVibration-resistant, corrosion-resistant, pollution-resistant
CertificationsCE, ROHS, KC, ISO9001
Leading TimeWithin a week after full payment
Delivery MethodDHL or other methods as per discussion
Max Frequency Response300KHz
Consumption Current≤80mA (Open Collector), ≤150mA (Line Driver)
Load Current40mA (Open Collector), 60mA (Line Driver)
Voltage OutputMin. Vcc x 70% (Open Collector)
Max. Rotary Speed3000 rpm
Start Torque4 x 10^-3 N•M
Max Shaft LoadAxial: 29.4N, Radial: 19.6N
Weight160-200g
Working Temperature-30~80℃
Storage Temperature-40~80℃
Protection GradeIP54

Electrical Data

SpecificationValue
ResolutionMax. 16 bits (single turn), Total Max. 29 bits
InterfaceParallel, NPN/PNP open collector, Push-pull, Line Driver
Output CodeBinary, Gray, Gray Excess, BCD
Supply Voltage8-29V
Max Frequency Response300KHz

Current Characteristics

Output TypeConsumption CurrentLoad CurrentVOH (Voltage Output High)VOL (Voltage Output Low)
Open Collector≤80mA40mAMin. Vcc x 70%Max. 0.4V
Line Driver≤150mA60mAMin. 3.4VMax. 0.4V
Push Pull≤80mA40mAMin. Vcc - 1.5VMax. 0.8V

Mechanical Data

SpecificationValue
Start Torque4 x 10^-3 N•M
Max Shaft LoadAxial: 29.4N, Radial: 19.6N
Max Rotary Speed3000 rpm
Weight160-200g

Environment Data

SpecificationValue
Working Temperature-30~80℃
Storage Temperature-40~80℃
Protection GradeIP54

Connection Details

SignalVccGNDD0D1D2D3D4D5D6D7D8D9
ColorBrownWhiteRed/BlueGray/PurpleBlueGreenPinkPurpleWhiteGrayYellowBrown

Important Notes

  • Use elastic soft connection between encoder shaft and user output shaft to avoid damage.

  • Axial deviation between encoder shaft and user output shaft should not exceed 0.20mm, and angle deviation should be less than 1.5°.

  • Avoid impacts or collisions during installation.

  • Ensure correct wiring connections, particularly the ground and power lines.

  • Use shielded cables for wiring and consider signal attenuation for long-distance transmission.


FAQ

CategoryDetails
DeliveryLeading time: within a week after full payment; delivery by DHL or other logistics as per request.
PaymentBank transfer, Western Union, PayPal
Quality ControlProfessional quality inspection team led by Mr. Hu, with over 10 years of encoder industry experience.
Technical SupportLed by Dr. Zhang, the team has made breakthroughs in Profinet, EtherCAT, Modbus-TCP, Powerlink development.
CertificationsCE, ISO9001, ROHS, KC under process
InquiryInquiries will be replied within 24 hours; instant messaging via WhatsApp or WeChat available for technical and marketing support.
Warranty1-year warranty with lifetime technical support

Packaging Details

The rotary encoder is packed in standard export packaging or as per buyer's request.