GT-1274 Series Manual Pluse Generator For CNC Lathe And Printing Mechanism, To Accomplish Zero Collaboration Or Signal Segmentation

short description:

Manual pulse generators(handwheel/mpg) are typically rotating knobs that generate electrical pulses. They are normally associated with computer numerically controlled (CNC) machinery or other devices involving positioning.When the pulse generator sends an electrical pulse to an equipment controller, the controller then moves a piece of equipment a predetermined distance with every pulse.

  • Size: 122*74mm;
  • Resolution: 20ppr,100ppr;
  • Supply Voltage: 5v, 12v, 5-24v(+-10%)
  • Output form: Line Driver, Voltage Output
  • Emergency Button: N/A
  • Enable Button: N/A
  • Product Detail

    Product Tags

    GT-1274 Series Manual Pluse Generator For CNC Lathe And Printing Mechanism, To Accomplish Zero Collaboration Or Signal Segmentation

    manual pulse generator (MPG) is a device for generating electrical pulses (short bursts of low current) in electronic systems under the control of a human operator (manually), as opposed to the pulses automatically generated by software. MPGs are used on computer numerically controlled (CNC) machine tools, on some microscopes, and on other devices that use precise component positioning. A typical MPG consists of a rotating knob that generates pulses that are sent to an equipment controller. The controller will then move the piece of equipment a predetermined distance for each pulse.

    It can be applied in machining center, CNC milling machine, woodworking router machine, stone engraving machine, advertisement engraving machine, etc.

    For example, the handwheel of a typical CNC control will move any of the slides of the machine by one minimum increment, such as 1 micrometre or 1 ten-thousandth of an inch, for each pulse, and the handwheel will give one ratchet-like click or other haptic click to confirm to the user that a single increment occurred. Several selector switches control the handwheel’s output: one allows each of the machine’s axes (X, Y, Z, and so on) to be selected in turn; another shifts through several ranges of output, so that one click of the wheel is either one minimum increment, 10 times that, or 100 times that.

    Manual pulse generators may involve analog voltage or digital square wave output formats.  Analog voltage is typically expressed as a voltage range, such as 0-10V or ±5V.  Square waves are naturally produced by binary devices such as encoders and are therefore a natural choice for pulse generators as well.  As shown below, a square wave alternates between regularly between two distinct (binary) levels.

    GT-1274 manual pulse gererator with options of 25ppr and 100ppr, can work with GSK  SYNTEC  KND  SIMENS  MITSUBISH  FANUC System.

    Model: ADK1274

    Features:1.Gertech Hand Wheel is widely applied in CNC Lathe and Printing Mechanism, to accomplish

     zero Collaboration or Signal Segmentation.

    2.High reliability, long life and strong anti-interference ability,wide temperature range for operating.

    3.Metal gear brings, reliable and clear feeling when rotating;

    4.Plastic Cover, Oil-proof Seal Design;



    122 x 74mm

    Resolution 100,25ppr
    Supply Voltage 5v, 12v, 24v(+-10%)
    Output form Line Driver, Voltage Output
    Max Current Consumption 80mA(Line) 120mA(V)
    Max. Response Frequency 10khz
    Rise/fall Time 200ns(Line Driver),1μs(Voltage)
    Net Weight 1100g
    Working Temp. -20℃-85℃
    Humidity 30~85%
    Degree of Protection IP50
    Options of Axles X,Y / X Y Z 4 5 6  
    Magnification Levels N/A, X1, X10, X100

    Five steps let you know how to select your encoder:
    1.If you’ve already used encoders with other brands, plz feel free to send us the information of the brand info and encoder info, like model no, etc, our engineer will advise you with our euqivalent replacement at a high cost performance;
    2.If you want to find an encoder for your application, plz first select encoder type: 1) Incremental encoder 2) Absolute encoder 3) Draw Wire Sensors 4) Manual Pluse Generator
    3. Choose your output format(NPN/PNP/LINE DRIVER/PUSH PULL for incremental encoder) or interfaces(Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
    4. Select the resolution of the encoder, Max.50000ppr for Gertech incremental encoder, Max.29bits for Gertech Absolute Encoder;
    5. Select the housing Dia and shaft dia. of the encoder;
    Gertech is popular equivalent replacement for similar foreign products such as Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer /Tamagawa/Hengstler /Trelectronic/Pepperl+Fuchs/Elco/Kuebler ,ETC.


    Gertech Equivalent replace:
    E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
    E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
    E6A2-CWZ3E, E6A2-CWZ5C; E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
    E6B2-CWZ3E, E6B2-CBZ5C; E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
    E6C2-CWZ3E, E6C2-CBZ5C;
    Autonics: E30S, E40S, E40H,E50S, E50H, E60S, E60H Series


    Packaging Details
    The rotary encoder is packed in standard export packaging or as required by buyers;

    Packaging Details
    The rotary encoder is packed in standard export packaging or as required by buyers;


    About Delivery:

    Leading time: Delivery can be within a week after full payment by DHL or other logics as per requested; 

    About Payment:

    Payment can be made through bank transfer, west union and Paypal;

    Quality Control:

    Professional and experienced quality inspection team leaded by Mr. Hu, can ensure the quality of each product when it leaves the factory.Mr. Hu has more than 10 years experience in the industries of encoders,

    About technique support:

    Professional and experienced technique team leaded by Doctor Zhang, has accomplished  many breakthroughs in the development of encoders, apart from normal incremental encoders, Gertech now has finished Profinet, EtherCAT, Modbus-TCP and Powe-rlink development;


    CE,ISO9001,Rohs and KC is under process;

    About Inquiry:

    Any inquiry will be replied within 24 hours, and customer also can add what’s app or wechat for Instant messaging, our marketing team and technical team will offer professional service and suggestion;

    Guarantee policy:

    Gertech offers 1year warranty and life-long technical support;

    We’re here to help. Our engineers and encoder experts will respond quickly to your toughest, most technical encoder questions.

    Expedite options are available on many models. Contact us for;

  • Previous:
  • Next: