Kayayyaki

GMA-S Series SSI Interface Multi-Juya Cikakkar Encoder

GMA-S Series cikakkar encoder shine SSI multijujuwa cikakkar encoder.Interface Serial Synchronous Synchronous Serial Interface (SSI) maki-zuwa-maki ne don haka ba za a iya haɗa bayi tare ba.SSI ita ce jagora guda ɗaya, watsa bayanai daga bawa zuwa jagora ne kawai.Don haka ba zai yiwu ba maigida ya aika bayanan daidaitawa ga bawa.Gudun sadarwa yana iyakance ga 2 Mbit / sec. Yawancin na'urorin SSI suna aiwatar da watsawa sau biyu don inganta amincin sadarwa.Maigida yana kwatanta watsawa don gano kurakurai.Duban juna (shafi) yana ƙara haɓaka gano kuskure.SSI daidaitaccen ma'auni ne kuma yawancin nau'ikan da aka gyara sun wanzu gami da zaɓi na ƙara AqB ko mu'amalar zunubi/cos.A cikin wannan aiwatar da cikakken matsayi ana karantawa ne kawai a farawa.Housing Dia.:38,50,58mm;Tsararren Shaft Diamita: 6,8,10mm;Resolution: Juya guda ɗaya max.16bits;Mahimman bayanai:SSI;Lambar fitarwa: Binary, Grey, Grey Excess, BCD;Kayan Wutar Lantarki: 5v,8-29v;

Takaddun shaida: CE, ROHS, KC, ISO9001

Lokacin jagora:A cikin mako guda bayan cikakken biya;Bayarwa ta DHL ko wani kamar yadda aka tattauna;

▶ Tsawon Gida:38,50,58mm;

▶ Matsakaicin Shaft Diamita: 6,8,10mm;

▶Interface: SSI;

▶ Resolution: Max.16bits, Juya guda ɗaya max.16bits, Total Max.29bits

▶ Kayan Wutar Lantarki: 5v, 8-29v;

▶ Lambar fitarwa: Binary, Grey, Grey Excess, BCD;

▶ Ana amfani da shi a fannoni daban-daban na tsarin sarrafawa ta atomatik da tsarin aunawa, kamar masana'anta, jigilar kaya, yadi, bugu, jirgin sama, injin gwadawa na soja, lif, da sauransu.

▶ Mai jure jijjiga, mai jure lalata, mai jure gurbacewa;

Samfurin fitarwa:

1)Samfurin Fitar Bayanai Guda Daya

Karatun gama gari

   Maimaita Karatu

2)Samfurin fitar da bayanai na ci gaba

Lura:

▶Adopt na roba taushi dangane za a yi amfani tsakanin encoder shaft da fitarwa shaft na mai amfani da karshen don kauce wa lalacewa na encoder shaft tsarin saboda serial motsi da gudu daga mai amfani shaft.

▶ Da fatan za a kula da nauyin axle da aka yarda yayin shigarwa.

▶ Tabbatar cewa bambanci tsakanin Axial Degree na encoder shaft da mai amfani da fitarwa shaft ba zai zama fiye da 0.20mm, da kuma karkacewar. kwana tare da axis zai zama ƙasa da 1.5 °.

▶ Yi ƙoƙarin guje wa ƙwanƙwasawa da faɗuwar karo yayin shigarwa;

▶Kada a haɗa layin wutar lantarki da wayar ƙasa a baya.

▶ Wayar GND za ta kasance mai kauri kamar yadda zai yiwu, gabaɗaya ya fi φ 3 girma.

▶Kada a haɗa layin rikodin fitarwa da juna don gujewa lalata da'irar fitarwa.

▶Kada a haɗa layin siginar siginar da wutar lantarki ta DC ko AC halin yanzu don gujewa lalata da'irar fitarwa.

▶ Motar da sauran kayan aikin da aka haɗa da encoder za su kasance da ƙasa sosai ba tare da tsayayyen wutar lantarki ba.

▶ Za a yi amfani da kebul mai kariya don yin waya.

▶Kafin fara na'ura, bincika a hankali ko wiring ɗin daidai ne.

▶ A lokacin watsa nisa mai nisa, za a yi la'akari da siginar attenuation factor, kuma za a zaɓi yanayin fitarwa tare da ƙarancin fitarwa da ƙarfin hana tsangwama.

▶ Guji yin amfani da ƙaƙƙarfan yanayi na igiyoyin lantarki.

Matakai guda biyar suna sanar da kai yadda ake zabar rikodi:
1.Idan kun riga kun yi amfani da encoders tare da wasu samfuran, plz jin daɗin aiko mana da bayanan alamar info da bayanan ɓoye, kamar ƙirar no, da sauransu, injiniyan mu zai ba ku shawara tare da maye gurbin euqivalent a babban farashi mai tsada;
2.Idan kuna son nemo maƙallan aikace-aikacen ku, plz fara zaɓi nau'in ɓoye: 1) encoder ƙarawa 2) cikakken encoder 3) Zana Sensors Wire 4) Manual Pluse Generator
3. Zaɓi tsarin fitarwa naka (NPN/PNP/ LINE DRIVER/PUSH PULL don ƙarar encoder) ko musaya (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Zaɓi ƙudurin mai rikodin, Max.50000ppr don encoder incremental na Gertech, Max.29bits don Gertech Absolute Encoder;
5. Zaɓi mahalli Dia da shaft dia.na rikodin;
Gertech sanannen maye ne na samfuran ƙasashen waje irin su Sick / Heidenhain/Nemicon/Autonics/Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.

Canjin Gertech Daidai:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C, E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C, E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
Autonics: E30S, E40S, E40H, E50S, E50H, E60S, E60H Series

Cikakkun bayanai
Mai rikodin rotary yana cike cikin daidaitaccen marufi na fitarwa ko kamar yadda masu siye suka buƙata;

Matakai guda biyar suna sanar da kai yadda ake zabar rikodi:
1.Idan kun riga kun yi amfani da encoders tare da wasu samfuran, plz jin daɗin aiko mana da bayanan alamar info da bayanan ɓoye, kamar ƙirar no, da sauransu, injiniyan mu zai ba ku shawara tare da maye gurbin euqivalent a babban farashi mai tsada;
2.Idan kuna son nemo maƙallan aikace-aikacen ku, plz fara zaɓi nau'in ɓoye: 1) encoder ƙarawa 2) cikakken encoder 3) Zana Sensors Wire 4) Manual Pluse Generator
3. Zaɓi tsarin fitarwa naka (NPN/PNP/ LINE DRIVER/PUSH PULL don ƙarar encoder) ko musaya (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Zaɓi ƙudurin mai rikodin, Max.50000ppr don encoder incremental na Gertech, Max.29bits don Gertech Absolute Encoder;
5. Zaɓi mahalli Dia da shaft dia.na rikodin;
Gertech sanannen maye ne na samfuran ƙasashen waje irin su Sick / Heidenhain/Nemicon/Autonics/Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.

Canjin Gertech Daidai:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C, E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C, E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
Autonics: E30S, E40S, E40H, E50S, E50H, E60S, E60H Series

Cikakkun bayanai
Mai rikodin rotary yana cike cikin daidaitaccen marufi na fitarwa ko kamar yadda masu siye suka buƙata;

FAQ:
1) Yadda za a zabar encoder?
Kafin yin oda masu rikodin, za ku iya sanin a sarari ko wane nau'in rikodi kuke buƙata.
Akwai encoder na haɓakawa da cikakkiyar maƙalli, bayan wannan, sashin sabis ɗinmu zai fi aiki a gare ku.
2) Menene ƙayyadaddun bayanai bukatasted kafin oda encoder?
Nau'in encoder—————-suri mai ƙarfi ko rami mara tushe
Diamita na Waje———-Min 25mm, MAX 100mm
Diamita na Shaft—————Min shaft 4mm, Max shaft 45mm
Mataki & Ƙaddamarwa———Min 20ppr, MAX 65536ppr
Yanayin Fitar da Wuta --- zaku iya zaɓar NPN, PNP, Voltage, Push-pull, direban layin, da sauransu.
Kayan Wutar Lantarki ——DC5V-30V
3) Yadda za a zabi madaidaicin encoder da kanka?
Takaitaccen Bayanin Bayani
Duba Girman Shigarwa
Tuntuɓi mai kaya don samun ƙarin cikakkun bayanai
4) Guda nawa za a fara?
MOQ shine 20pcs . Ƙananan yawa kuma yana da kyau amma kaya ya fi girma.
5) Me yasa zabar "Gertech” Brand Encoder?
Dukkan injiniyoyin injiniyoyinmu ne suka tsara su kuma suka haɓaka su tun daga shekara ta 2004, kuma galibin ɓangaren lantarki na maɓallai ana shigo da su daga kasuwannin ketare.Mun mallaki Anti-static kuma babu kura bitar kuma samfuranmu sun wuce ISO9001.Kada ku bari ingancinmu ya ragu, saboda inganci shine al'adunmu.
6) Yaya tsawon lokacin jagoran ku?
Short gubar lokaci--3 kwanaki don samfurori, 7-10days domin taro samar
7) menene manufar garantin ku?
Garanti na shekara 1 da goyon bayan fasaha na tsawon rai
8) Menene amfanin idan muka zama hukumar ku?
Farashi na musamman, Kariyar Kasuwa da tallafi.
9) Menene tsarin zama hukumar Gertech?
Da fatan za a aiko mana da tambaya, za mu tuntube ku da wuri-wuri.
10) Menene karfin samar da ku?
Muna samar da 5000pcs kowane mako. Yanzu muna gina layin samar da magana na biyu.