N'ogbe GE-A Series Sine/ Cosine Mmepụta Mgbama Gear Type Encoder Manufacturer and Supplier |Gertech

GE-A Series Sine/ Cosine Mbupụta Ngosipụta Gear Type Encoder

GE-A Series Sine/Cosine Mpụta Mbupụta Gear Ụdị ihe onyonyo egosipụtara

nkowa nkenke:

Ụdị GE-A Gear Encoders bụ ihe ntinye mgbakwunye na-enweghị kọntaktị maka ọsọ rotary na nha ọnọdụ.Dabere na teknụzụ sensọ Tunneling Magnetoresistance (TMR) pụrụ iche nke Gertech, ha na-enye akara ngosi mmehie dị iche iche nke orthogonal nwere ogo dị elu, yana mgbama index na akara mgbama ha.Emebere GE-A usoro maka 0.3 ~ 1.0-module gears nwere ọnụ ọgụgụ ezé dị iche iche.

Nha:210*88mm

Mkpebi:25,100 n'arọ

Voltaji na-eweta:5v, 12v, 5-24v(+-10%)

Mpụta:Ọkwọ ụgbọ ala, mmepụta voltaji

Bọtịnụ nkwụsị ihe mberede:Ee

Kwado bọtịnụ:Ee

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

GE-A Series Sine/Cosine Ntinye akara ngosi

Ọsọ ọsọ dị elu na ihe mmetụta ọnọdụ nwere nsonaazụ Sine/Cosine, na-akwado ọrụ nbipu n'ịntanetị.

Ngwa:

GE-A-Series-Gear-ụdị-encoder-2

Spindle-Moto CNC Ọsọ nha ọnọdụ ọnọdụ

n Rotary ọnọdụ na ịhụ ọsọ na igwe CNC

n Ike na usoro mmepụta ike

n Ngwa ụgbọ oloko

n Elevators

Nkọwa zuru oke

Atụmatụ

Ngosipụta mgbaàmà mmepụta na 1Vpp nwere ogo dị elu

Nzaghachi ugboro ugboro dị elu ruo 1MHz

Ọnọdụ okpomọkụ na-arụ ọrụ sitere na -40 ° C ruo 100 ° C

IP68 nchebe ọkwa

Uru

n Ụlọ mechiri emechi nke ọma na ihe mkpuchi ọla iji hụ na ọkwa nchebe kachasị elu

Ntụnye na-enweghị kọntaktị, abrasion na vibration n'efu, nwere ike ịrụ ọrụ na gburugburu ebe siri ike dị ka mmiri, mmanụ ma ọ bụ ájá.

n Induction magnetik na-adịghị ike na-egbochi ngwa ahụ ka ọ bụrụ magnetized, na elu nke ihe ngbanwe ahụ adịghị mfe ịgbasa faịlụ ígwè.

n Nnukwu nnabata maka oghere ikuku na ọnọdụ nrụnye nwere ihe mmetụta TMR nwere mmetụta dị elu

n Ma convex na concave ụdị ka ekwe maka index index

Igwe ọkụ eletrik

AKWỤKWỌ	PARAMETER AHA	URU	IHE
Vcc	Voltaji na-eweta	5±10% V	DC
Lout	Mmepụta ugbu a	≤20mA	Enweghị ibu
Mkpu	Mgbama ngosi mmepụta	mmehie/cos (1Vpp± 10%)
Fin	Ugboro ntinye	≤1M Hz
Fout	Ugboro mmepụta	≤1M Hz
	Usoro	90°±5%
	Usoro mmezi	Akwụkwọ ntuziaka
	Nguzogide mkpuchi	10MΩ	DC500V
	Nagide voltaji	AC500 V	1 Min
	EMC Group Pulse	4000 V

Mechanical Parameters

AKWỤKWỌ	PARAMETER AHA	URU	IHE
D	Ebe dị anya n'etiti oghere mgbago	27mm	Iji abụọ M4 kposara
Oghere	Ọpụpụ ikuku	0.2 / 0.3 / 0.5mm	Dabara na 0.4/0.5/0.8- modul n'otu n'otu
Tol	Nkwalite ndidi	± 0.05mm
To	Okpomọkụ na-arụ ọrụ	-40 ~ 100 Celsius
Ts	Okpomọkụ nchekwa	-40 ~ 100 Celsius
P	Ọkwa nchekwa	IP68	Zinc alloy ụlọ, ite zuru oke

Ngwa ngwa akwadoro

AKWỤKWỌ	PARAMETER AHA	URU	IHE
M	Gear Module	0.3 ~ 1.0mm
Z	Ọnụọgụ nke eze	enweghị oke
δ	Obosara	Min.10mm	Kwadoro 12mm
	Ihe onwunwe	ferromagnetic ígwè	Na-akwado 45 # ígwè
	Ụdị nha nha nha	convex / concave eze	Kwado eze concave
	Oke obosara eze n'etiti akwa abụọ	1:1	Obosara ezé index bụ 6mm
	Nzizi Gear	n'elu ọkwa ISO8	Dabara na ọkwa JIS4

Usoro mgbako nke parampat gia:

GE-A-Series-Gear-ụdị-encoder-11

Ihe ngosi mmepụta

Ihe nrịbama mmepụta nke encoder bụ akara sine/cosine dị iche nwere njupụta 1Vpp yana mgbama index.Enwere ọdụ mmepụta isii gụnyere A+/A-/B+/B-/Z+/Z-.Mgbama A/B bụ akara sine/cosine dị iche iche orthogonal abụọ, yana akara Z bụ akara nrịbama.

Chaatị a na-esote bụ akara XT dị iche A/B/Z tụrụ.

GE-A-Series-Gear-ụdị-encoder-13

Chaatị a na-esote bụ Lissajous-Figure nke akara XY tụrụ atụ.

GE-A-Series-Gear-ụdị-encoder-14

Gear Module

Emebere usoro ngwaahịa GE-A maka gia na 0.3 ~ 1.0-modul, ọnụ ọgụgụ ezé nwere ike ịdị iche.

Tebụl na-esonụ na-egosi oghere ikuku na-atụ aro n'okpuru 0.4 / 0.5 / 0.8-modul.

Gear Module	Ọpụpụ ikuku	Nkwalite ndidi
0.4	0.2mm	± 0.05mm
0.5	0.3mm	± 0.05mm
0.8	0.5mm	± 0.05mm

Ọnụọgụ nke eze

Ihe ngbanwe kwesịrị dakọtara gia na ọnụ ọgụgụ ezé kwesịrị ekwesị maka nsonaazụ kacha mma.Nọmba akwadoronke ezé bụ 128, 256, ma ọ bụ 512. A na-anabata obere ọdịiche dị na ọnụ ọgụgụ ezé na-enweghị emetụta àgwà nkeihe ngosi mmepụta.

Usoro ntinye

Ihe ngbanwe ahụ na-egosipụta nhazi kọmpat na anya dị n'etiti oghere abụọ na-arị elu na 27mm, na-eme yadakọtara na ọtụtụ ngwaahịa ndị yiri ya na ahịa.Usoro ntinye bụ nke a.

1. Tinye ihe mkpuchi ahụ site na iji kposara M4 abụọ.The kposara ekwesịghị ike tightened ma ekwe ka mgbanwe makaoghere ikuku na-arị elu.

2. Fanye ihe nledo mmetụta nke nwere ọkpụrụkpụ achọrọ n'etiti koodu na ngwa.Bugharịa ihe ngbanwe ahụ gaa n'ihungwa ahụ ruo mgbe ọ nweghị ohere dị n'etiti koodu ntinye, ihe nlele mmetụta na ngwa ahụ, enwere ike iwepụ mmetụta ahụ.were were na-enweghị itinye mgbakwunye ike.

3. Jisie ike abụọ M4 kposara ma dọpụta mmetụta mmetụta.

N'ihi ike njide onwe nke arụnyere n'ime koodu ahụ, ọ ga-emepụta mgbama mmepụta achọrọ ma ọ bụrụhaala na ọ dị mma.A na-ahụta oghere ikuku site na usoro dị n'elu n'ime nnabata.

USB

Igwe ngbanwe nke ụdị nkịtị nwere wired asatọ gbagọrọ agbagọ agbagọ.Akụkụ obe nke eririisi bụ 0.14mm2, na mpụta dayameta bụ 5.0±0.2mm.Ogologo eriri USB bụ 1m, 3m, 5m na ndabara.Igwe ngbanwe ụdịdị emelitere nwere waya gbagọrọ agbagọ agbagọ iri.Akụkụ obe nke eririisi bụ 0.14mm2, na mpụta dayameta bụ 5.0±0.2mm.Ogologo eriri USB bụ 1m, 3m, 5m na ndabara.

Akụkụ

GE-A-Series-Gear-ụdị-encoder-16

Nkwanye ọnọdụ

GE-A-Series-Gear-ụdị-encoder-18

Koodu ịtụ

GE-A-Series-Gear-ụdị-encoder-19

1: Ihe ngbanwe ụdị Gear

2 (Module Gear):04:0:4-modul 05:0:5-modul 0X: 0:X modul;

3 (A: Ụdị mgbaàmà Sin/Cos): A: Mgbama mmehie/Cos;

4 (Mgbakwunye):1 (nke mbụ);

5 (Ụdị Index):F: eze concave M: eze convex;

6 (Ọnụ ọgụgụ nke eze):128,256,512,XXX;

7 ( Ogologo eriri USB):1m (ọkọlọtọ), 3m, 5m;

8 (Ndozigharị n'ịntanetị):1: nkwado, 0: ọ bụghị nkwado;

Ekwenyere na ozi enyere na ebe a bụ eziokwu na ntụkwasị obi.Mbipụta anaghị ebufe ma ọ bụ egosighi ikike ọ bụla n'okpuru patent ma ọ bụ ikike mmepụta ihe ma ọ bụ ikike ọgụgụ isi ndị ọzọ.Gertech nwere ikike ime mgbanwe na nkọwapụta ngwaahịa maka ebumnuche imelite ogo ngwaahịa, ntụkwasị obi na arụmọrụ.Gertech anaghị ewere ụgwọ ọ bụla sitere na ngwa na iji ngwaahịa ya.Ndị ahịa Gertecg na-eji ma ọ bụ na-ere ngwaahịa a maka ngwa, ngwaọrụ, ma ọ bụ sistemu ebe enwere ike ịtụ anya nrụrụ aka nke ọma na ọ ga-ebute mmerụ ahụ nkeonwe na-eme ya n'ihe egwu nke onwe ha wee kwenye inye Gertech ụgwọ zuru oke maka mmebi ọ bụla sitere na ngwa dị otú ahụ.

Nke gara aga: GS-SV48 Series 2500ppr Servo moto Encoder

Osote: Ogo kacha mma Draw Wire Encoder na Modbus Absolute Encoder 0-10000mm dakọtara na usoro P+F Cen