GIS-MINI Series Obere nha 25mm, 30mm Housing Solid Shaft Incremental Encoder
Model GIS-MINI Series incremental encoder dị mma maka ngwa chọrọ obere, nkenke zuru oke, koodu ntinye arụmọrụ dị elu.Ihe dị ka 25mm/30mm na dayameta, ọ ga-adaba n'ebe ọtụtụ ndị ntinye koodu enweghị ike.Emebere ya na ihe owuwu ọla niile na mkpuchi bọọlụ, ọ ga-enye ọtụtụ afọ nke enweghị nsogbu.Nhọrọ flange arịọnụ dị mma maka ngwa chọrọ a bolt-on, elu nkenke koodu.Site na ntụkwasị obi ya dị elu yana nnyefe ngwa ngwa, ihe ngbanwe GIS-MINI Model bụ ihe ngbanwe zuru oke na ụdị nha a.
GIS-MINI Series incremental encoder na-enye azịza nzaghachi dị elu na ngwugwu profaịlụ dị ala, na-eme ka ọ dị mma maka ngwa ụlọ ọrụ azụmahịa na ọrụ ọkụ.
▶ Ebe obibi: 25,30mm;
▶ Ogologo osisi siri ike: 4,5mm;
▶ Mkpebi: Max.1024ppr;
▶ Voltage na-ebunye: 5v, 8-29v;
▶ Usoro mmepụta: NPN/PNP onye na-anakọta oghe, Push pull, Line Driver;
▶ Ihe ngosi mmepụta: A B / ABZ / ABZ & A- B- Z-;
▶ A na-eji ya n'ọtụtụ ebe dị iche iche nke njikwa akpaaka na sistemu nha, dị ka nrụpụta igwe, mbupu, textile, mbipụta, ụgbọ elu, ụlọ ọrụ agha igwe nyocha, igwe mbuli, wdg.
▶Vibration-eguzogide, corrosion-eguzogide, mmetọ-eguzogide;
| Njirimara ngwaahịa | |||||
| Ụlọ Dia.: | 25mm, 30mm | ||||
| Shaft siri ike: | 4mm,5mm | ||||
| Data Eletriki | |||||
| Mkpebi: | Max.1024ppr | ||||
| Ụdị mmepụta: | NPN/PNP onye nchịkọta oghe, Push pull, Line Driver, Voltage Output; | ||||
| Akara ngosi: | A/AB / ABZ / ABZ & A- B- Z-; | ||||
| Voltaji na-eweta: | 5V, 8-29V | ||||
| Oke.Nzaghachi ugboro ugboro | 100Khz | ||||
| Mepee mkpokọta | Mpụta voltaji | Onye ọkwọ ụgbọ ala | Pịa Pull | ||
| Oriri ugbu a | ≤80mA; | ≤80mA; | ≤150mA; | ≤80mA; | |
| Ibu ibu ugbu a | 40mA; | 40mA; | 60mA; | 40mA; | |
| VOH | Min.Vcc x 70%; | Min.Vcc - 2.5v | Min.3.4v | Min.Vcc - 1.5v | |
| VOL | Oke.0.4v | Oke.0.4v | Oke.0.4v | Oke.0.8v | |
| MechanicalData | |||||
| Malite Torque | 1.5 x 10-3N•M | ||||
| Oke.Nbudata Shaft | Axial: 10N, Radial:5N; | ||||
| Oke.Ọsọ Rotary | 5000rpm | ||||
| Ibu | 100g | ||||
| Data gburugburu | |||||
| Okpomọkụ na-arụ ọrụ. | -30 ~ 80 ℃ | ||||
| Okpomọkụ nchekwa. | -40 ~ 80 ℃ | ||||
| Ọkwa nchekwa | IP54 | ||||
| Ụdị ebili mmiri |
| Mgbama ngosi mmepụta ihe |
| Koodu ịtụ |
| Akụkụ |
Nzọụkwụ ise na-eme ka ị mara ka ị ga-esi họrọ koodu ntinye gị:
1.If ị na-ama na-eji encoders na ndị ọzọ ụdị, plz na-eche free iziga anyị ozi nke ika info na encoder info, dị ka nlereanya mba, wdg, anyị engineer ga-enye ndụmọdụ gị na anyị euqivalent nnọchi na a elu na-eri arụmọrụ;
2.Ọ bụrụ na ịchọrọ ịchọta koodu ntinye maka ngwa gị, plz buru ụzọ họrọ ụdị koodu: 1)Ntinye koodu ntinye2) Ihe ngbanwe zuru oke 3) See ihe mmetụta waya 4) Ọkụ Pluse Generator akwụkwọ ntuziaka.
3. Họrọ usoro mmepụta gị (NPN/PNP/LINE DRIVER/PUSH PULL for incremental encoder) ma ọ bụ interfaces (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Họrọ mkpebi nke encoder, Max.50000ppr maka Gertech incremental encoder, Max.29bits maka Gertech Absolute Encoder;
5. Họrọ ebe obibi Dia na shaft dia.nke koodu;
Gertech bụ onye nnọchi anya nha anya maka ngwaahịa si mba ọzọ dị ka Sick / Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.
Ndokwa nhata:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
Autonics: E30S, E40S, E40H, E50S, E50H, E60S, E60H Series
Nkọwa nkwakọ ngwaahịa
A na-akwakọba ihe ngbanwe rotary na nkwakọ ngwaahịa mbupụ ọkọlọtọ ma ọ bụ dị ka ndị na-azụ ahịa chọrọ;
Ajụjụ:
1) Kedu otu esi ahọrọ koodu nzuzo?
Tupu ịtụ koodu koodu, ị nwere ike mara nke ọma ụdị koodu ị nwere ike ịchọ.
Enwere koodu ntinye agbakwunyere na koodu nzuzo zuru oke, mgbe nke a gasịrị, ngalaba ọrụ ire ahịa ga-abara gị uru.
2) Kedu nkọwapụta arịrịọsted tupu ịtụ koodu koodu?
Ụdị ngbanwe—————-osisi siri ike ma ọ bụoghere oghere koodu
Dayameta Mpụga———-Nkeji 25mm, MAX 100mm
Oghere Oghere—————Ogwe Obere 4mm, Ogwe kacha 45mm
Usoro & Mkpebi———Nkeji 20ppr, MAX 65536ppr
Ọnọdụ mmepụta sekit --- ị nwere ike ịhọrọ NPN, PNP, Voltage, Push-pull, Line ọkwọ ụgbọ ala, wdg.
Voltaji na-enye ike——DC5V-30V
3) Otu esi ahọrọ koodu nzuzo ziri ezi site n'onwe gị?
Nkọwa nkọwa kpọmkwem
Lelee akụkụ nwụnye
Kpọtụrụ onye na-eweta ngwaahịa ka ị nweta nkọwa ndị ọzọ
4) Iberibe ole ka ịmalite?
MOQ bụ 20pcs. Obere obere dịkwa mma ma ibu dị elu.
5) Gịnị mere họrọ "Gertech” Ihe mkpuchi ika?
Ndị otu injinia nke anyị chepụtara ma mepụta koodu ntinye niile kemgbe afọ 2004, a na-ebubatakwa ọtụtụ ngwa eletrọnịkị nke encoders site na ahịa esenidụt.Anyị nwere ụlọ ọrụ Anti-static na enweghị uzuzu na ngwaahịa anyị gafere ISO9001.Ekwela ka àgwà anyị daa, n'ihi na àgwà bụ omenala anyị.
6) Ogologo oge ole ka oge ndu gị dị?
Oge ụzọ dị mkpirikpi - ụbọchị 3 maka ihe nlele, ụbọchị 7-10 maka mmepụta oke
7) kedu ihe bụ amụma nkwa gị?
Akwụkwọ ikike 1 afọ na nkwado teknụzụ ogologo ndụ
8) Gịnị bụ uru ma ọ bụrụ na anyị na-aghọ gị gị n'ụlọnga?
Ọnụ ahịa pụrụ iche, nchebe ahịa na nkwado.
9) Kedu usoro iji bụrụ ụlọ ọrụ Gertech?
Biko zitere anyị ajụjụ, anyị ga-akpọtụrụ gị ozugbo enwere ike.
10) Gịnị bụ gị mmepụta ike?
Anyị na-emepụta 5000pcs kwa izu. Ugbu a, anyị na-ewu nke abụọ nkebi ahịrịokwu mmepụta akara.
