GMA-PN Series encoder bụ Profinet interface gear-ụdị multi-atụgharị zuru oke koodu na ụlọ Dia.:58mm;Osisi siri ike Dia.: 10mm;Mkpebi: Multi-atụgharị Max.29bits;Voltaji ọkọnọ: 5v,8-29v, PROFINET bụ ọkọlọtọ nkwukọrịta maka akpaaka nkePROFIBUS & PROFINET International (PI).N'ime njirimara ya dị iche iche njirimara ndị a na-akwado ojiji nke PROFINET:
Ụzọ abụọ nke iji PROFINET dị: PROFINET IO, yiri PROFIBUS DP dị ka usoro I/O kesara na PROFINET CBA dị ka usoro ihe na-adabere na modul maka sistemu ka ukwuu.
A na-eme injinia nke PROFINET IO dị ka PROFIBUS.A na-ekenye bọs mpaghara (ya bụ Ethernet topologies) ka ha na-achịkwa sistemụ n'oge nhazi.A na-ahazi ngwaọrụ IO n'ime sistemụ arụmọrụ dabere na ọdịnaya nke faịlụ GSDML ya.Mgbe emechara injinia onye nrụnye na-ebu data maka mgbasawanye n'ime njikwa IO (PLC) yana onye njikwa IO na-ewere mgbanwe data na ngwaọrụ IO.
A na-agwa ngwaọrụ IO n'ime PROFINET (yana ikekwe site na akụrụngwa IT mpụga) site na adreesị IP ya.Enwere ike ịgbanwe data site na onye na-ahụ maka IO gaa na ngwaọrụ IO (na nke ọzọ) cyclically (maka data nhazi).Ewezuga nke a, enwere ike gbanwee data paramita n'otu oge n'oge injinia ngwaọrụ IO ma ọ bụ site na iji ngọngọ mmemme PLC.
Asambodo: CE,ROHS,KC,ISO9001
Oge ndu:N'ime otu izu mgbe ịkwụ ụgwọ zuru ezu;Nnyefe site na DHL ma ọ bụ ndị ọzọ dị ka a tụlere;
▶ Ogologo Ụlọ: 58mm;
▶ Ogologo ogwe osisi siri ike / oghere: 10mm;
▶ Mmepụta:Promma;
▶ Mkpebi: Multi-atụgharị Max.12bits tụgharịa, Otu ntụgharị Max.13bits;
▶ Voltage na-ebunye: 5v, 8-29v;
▶ A na-eji ya n'ọtụtụ ebe dị iche iche nke njikwa akpaaka na sistemu nha, dị ka nrụpụta igwe, mbupu, textile, mbipụta, ụgbọ elu, ụlọ ọrụ agha igwe nyocha, igwe mbuli, wdg.
▶Vibration-eguzogide, corrosion-eguzogide, mmetọ-eguzogide;
| Njirimara ngwaahịa | |
| Ụlọ Dia.: | 58mm |
| Shaft siri ike: | 10mm |
| Data Eletriki | |
| Mkpebi: | Max.16bits, Otu ntụgharị max.16bits, ngụkọta Max.29bits |
| Ihuenyo: | Uru |
| Voltaji na-eweta: | 8-29V |
| Oke.Nzaghachi ugboro ugboro | 30Khz |
| MechanicalData | |
| Malite Torque | 0.01N•M |
| Oke.Nbudata Shaft | Axial: 5-30N, Radial: 10-20N; |
| Oke.Ọsọ Rotary | 6000rpm |
| Ibu | 160-200 g |
| Data gburugburu | |
| Okpomọkụ na-arụ ọrụ. | -30 ~ 80 ℃ |
| Okpomọkụ nchekwa. | -40 ~ 80 ℃ |
| Ọkwa nchekwa | IP65 |
| Koodu ịtụ |
| Akụkụ |
Nzọụkwụ ise na-eme ka ị mara ka ị ga-esi họrọ koodu ntinye gị:
1.If ị na-ama na-eji encoders na ndị ọzọ ụdị, plz na-eche free iziga anyị ozi nke ika info na encoder info, dị ka nlereanya mba, wdg, anyị engineer ga-enye ndụmọdụ gị na anyị euqivalent nnọchi na a elu na-eri arụmọrụ;
2.Ọ bụrụ na ịchọrọ ịchọta koodu ntinye maka ngwa gị, plz buru ụzọ họrọ ụdị koodu ntinye: 1) ntinye ntinye 2) ihe mkpuchi zuru oke 3) Dọrọ Sensọ Wire 4) Manual Pluse Generator
3. Họrọ usoro mmepụta gị (NPN/PNP/LINE DRIVER/PUSH PULL for incremental encoder) ma ọ bụ interfaces (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Họrọ mkpebi nke encoder, Max.50000ppr maka Gertech incremental encoder, Max.29bits maka Gertech Absolute Encoder;
5. Họrọ ebe obibi Dia na shaft dia.nke koodu;
Gertech bụ onye nnọchi anya nha anya maka ngwaahịa si mba ọzọ dị ka Sick / Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.
Gertech Equivalent dochie:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
Autonics: E30S, E40S, E40H, E50S, E50H, E60S, E60H Series
Nkọwa nkwakọ ngwaahịa
A na-akwakọba ihe ngbanwe rotary na nkwakọ ngwaahịa mbupụ ọkọlọtọ ma ọ bụ dị ka ndị na-azụ ahịa chọrọ;
Ajụjụ:
1) Kedu otu esi ahọrọ koodu nzuzo?
Tupu ịtụ koodu koodu, ị nwere ike mara nke ọma ụdị koodu ị nwere ike ịchọ.
Enwere koodu ntinye agbakwunyere na koodu nzuzo zuru oke, mgbe nke a gasịrị, ngalaba ọrụ ire ahịa ga-abara gị uru.
2) Kedu nkọwapụta arịrịọsted tupu ịtụ koodu koodu?
Ụdị ihe nnochita—————-osisi siri ike ma ọ bụ ihe njiri oghere oghere
Dayameta Mpụga———-Nkeji 25mm, MAX 100mm
Oghere Oghere—————Ogwe Obere 4mm, Ogwe kacha 45mm
Usoro & Mkpebi———Nkeji 20ppr, MAX 65536ppr
Ọnọdụ mmepụta sekit --- ị nwere ike ịhọrọ NPN, PNP, Voltage, Push-pull, Line ọkwọ ụgbọ ala, wdg.
Voltaji na-enye ike——DC5V-30V
3) Otu esi ahọrọ koodu nzuzo ziri ezi site n'onwe gị?
Nkọwa nkọwa kpọmkwem
Lelee akụkụ nwụnye
Kpọtụrụ onye na-eweta ngwaahịa ka ị nweta nkọwa ndị ọzọ
4) Iberibe ole ka ịmalite?
MOQ bụ 20pcs. Obere obere dịkwa mma ma ibu dị elu.
5) Gịnị mere họrọ "Gertech” Ihe mkpuchi ika?
Ndị otu injinia nke anyị chepụtara ma mepụta koodu ntinye niile kemgbe afọ 2004, a na-ebubatakwa ọtụtụ ngwa eletrọnịkị nke encoders site na ahịa esenidụt.Anyị nwere ụlọ ọrụ Anti-static na enweghị uzuzu na ngwaahịa anyị gafere ISO9001.Ekwela ka àgwà anyị daa, n'ihi na àgwà bụ omenala anyị.
6) Ogologo oge ole ka oge ndu gị dị?
Oge ụzọ dị mkpirikpi - ụbọchị 3 maka ihe nlele, ụbọchị 7-10 maka mmepụta oke
7) kedu ihe bụ amụma nkwa gị?
Akwụkwọ ikike 1 afọ na nkwado teknụzụ ogologo ndụ
8) Gịnị bụ uru ma ọ bụrụ na anyị na-aghọ gị gị n'ụlọnga?
Ọnụ ahịa pụrụ iche, nchebe ahịa na nkwado.
9) Kedu usoro iji bụrụ ụlọ ọrụ Gertech?
Biko zitere anyị ajụjụ, anyị ga-akpọtụrụ gị ozugbo enwere ike.
10) Gịnị bụ gị mmepụta ike?
Anyị na-emepụta 5000pcs kwa izu. Ugbu a, anyị na-ewu nke abụọ nkebi ahịrịokwu mmepụta akara.
