GSA-B Series Single-Turn Biss Absolute Rotary Encoder
GSA-B Series Single-Turn Biss Absolute Rotary Encoder
BiSS-C minangka versi paling anyar saka BiSS.Versi lawas (BiSS-B) pancen ora bisa digunakake.BiSS-C minangka hardware sing kompatibel karo SSI standar, nanging ing saben siklus data, master sinau lan menehi kompensasi kanggo keterlambatan saluran sing ngidini tarif data 10 Mbit/s lan dawa kabel nganti 100 meter.Data sensor bisa kalebu sawetara "saluran" supaya informasi posisi lan status bisa ditularake ing siji pigura.BiSS-C nggunakake CRC (Lampiran) sing luwih kuat kanggo ndeteksi kesalahan transmisi. Diameter Perumahan: 38,50,58mm;Diameter Poros Padat/Kothong: 6,8,10mm;Resolusi: siji giliran max.1024ppr/max.2048ppr;Antarmuka: Biss;Kode Output: Binary, Gray, Gray Excess, BCD;
BiSS-C paling asring digunakake searah kaya SSI.BiSS-C uga ndhukung komunikasi bidirectional.Parameter bisa diganti tanpa ngganggu transmisi data sensor.Iki penting kanggo kontrol digital ing sistem umpan balik motor.BiSS-C ngenali pungkasan siklus lan nggunakake tingkat logika dikenali pungkasan ing baris jam minangka kontrol / bit data kanggo sensor mbisakake setelan parameter liwat sawetara siklus.
BiSS-C biasane digunakake point-to-point nanging uga ndhukung bussing.Ing konfigurasi bis kabeh piranti disambungake ing chain.Saben budak duwe loro konektor - BiSS-In lan BiSS-Out.Garis jam dilewati supaya saben budak nampa jam kasebut bebarengan.Data-Out saka abdi pisanan disambungake menyang master.Data-Out saka abdi kapindho disambungake menyang Data-In saka abdi pisanan lan sateruse.Kanthi cara iki data saka kabeh budak wis clocked metu menyang master ing siji pigura terus-terusan.
Sertifikat: CE, ROHS, KC, ISO9001
Wektu anjog:Ing minggu sawise mbayar lengkap;Delivery dening DHL utawa liyane minangka saben rembugan;
▶Diameter omah: 38,50,58mm;
▶Diameter Poros Padat/Berongga: 6,8,10mm;
▶ Antarmuka: BISS;
▶Resolusi: Putaran tunggal maks.1024ppr/maks.2048ppr;
▶Tegangan Pasokan: 5v,8-29v;
▶Kode Output: Biner, Gray, ;
▶ Digunakake ing macem-macem bidang kontrol otomatis lan sistem pangukuran, kayata manufaktur mesin, pengiriman, tekstil, percetakan, penerbangan, mesin uji industri militer, lift, lsp.
▶Tahan geter, tahan korosi, tahan polusi;
| Karakteristik produk | |||||
| Diameter omah: | 38,50,58 mm | ||||
| Diameter poros padat: | 6,8,10 mm | ||||
| Data Kelistrikan | |||||
| Resolusi: | Putaran tunggal maks.1024ppr/maks.2048ppr | ||||
| Antarmuka: | BISS/NPN/PNP kolektor terbuka; | ||||
| Kode Output: | Binary, Gray, Gray Excess, BCD | ||||
| Tegangan suplai: | 8-29V | ||||
| Maks.Respon Frekuensi | 30 Khz | ||||
| Arah Rotary | ccw | cw | |||
| Output | Format Output | NPN Open Kolektor | PNP Open Kolektor | ||
| Logika Output | Logika Positif | Logika Negatif | |||
| Sisa Tegangan | Io = 16mA | ≤0.4v | |||
| Io=32mA | ≤1.5v | ||||
| saiki | 32mA maks | ||||
| Mekanikdata | |||||
| Miwiti Torsi | 0.01N•M | ||||
| Maks.Poros Loading | Axial: 5-30N, Radial: 10-20N; | ||||
| Maks.Kacepetan Rotary | 3000rpm | ||||
| Bobot | 160-200 g | ||||
| Data Lingkungan | |||||
| Temp Kerja. | -30~80 ℃ | ||||
| Suhu panyimpenan | -40~80 ℃ | ||||
| Kelas Proteksi | IP54 | ||||
| Sambungan Anjog (1): | |||||||
| Pin | warna | Resolusi | |||||
| 1024 | 512 | 256/180 | 128/90 | 64 | 32 | ||
| 1 | Biru | 0V | 0V |
|
|
|
|
| 2 | coklat | 8V-29V | 8V-29V |
|
|
|
|
| 3 | ireng | BIT1(20) | N/A |
|
|
|
|
| 4 | abang | BIT2(21) | BIT1(20) | N/A |
|
|
|
| 5 | Oranye | BIT3(22) | BIT2(21) | BIT1(20) | N/A |
|
|
| 6 | kuning | BIT4(23) | BIT3(22) | BIT2(21) | BIT1(20) | N/A |
|
| 7 | Ijo | BIT5(24) | BIT4(23) | BIT3(22) | BIT2(21) | BIT1(20) | N/A |
| 8 | wungu | BIT6(25) | BIT5(24) | BIT4(23) | BIT3(22) | BIT2(21) | BIT1(20) |
| 9 | abu-abu | BIT7 (26) | BIT6(25) | BIT5(24) | BIT4(23) | BIT3(22) | BIT2(21) |
| 10 | Putih | BIT8(27) | BIT7 (26) | BIT6(25) | BIT5(24) | BIT4(23) | BIT3(22) |
| 11 | Ireng/Putih | BIT9 (28) | BIT8(27) | BIT7 (26) | BIT6(25) | BIT5(24) | BIT4(23) |
| 12 | Abang/Putih | BIT 10 (29) | BIT9 (28) | BIT8(27) | BIT7 (26) | BIT6(25) | BIT5(24) |
| 13 | Biru/Putih | Zero Reset | |||||
| Garis Pelindung |
| GND |
|
|
|
| |
| Pin | warna | Resolusi | ||||||
| 2048 | 1024/720 | 512/360 | 256/180 | 128 | 64 |
| ||
| 1 | Biru | 0V | 0V |
|
|
|
|
|
| 2 | coklat | 8V-29V | 8V-29V |
|
|
|
|
|
| 3 | ireng | BIT1(20) | BIT1(20) | N/A |
|
|
|
|
| 4 | abang | BIT2(21) | BIT2(21) | BIT1(20) | N/A |
|
|
|
| 5 | Oranye | BIT3(22) | BIT3(22) | BIT2(21) | BIT1(20) | N/A |
|
|
| 6 | kuning | BIT4(23) | BIT4(23) | BIT3(22) | BIT2(21) | BIT1(20) | N/A |
|
| 7 | Ijo | BIT5(24) | BIT5(24) | BIT4(23) | BIT3(22) | BIT2(21) | BIT1(20) | N/A |
| 8 | wungu | BIT6(25) | BIT6(25) | BIT5(24) | BIT4(23) | BIT3(22) | BIT2(21) | BIT1(20) |
| 9 | abu-abu | BIT7 (26) | BIT7 (26) | BIT6(25) | BIT5(24) | BIT4(23) | BIT3(22) | BIT2(21) |
| 10 | Putih | BIT8(27) | BIT8(27) | BIT7 (26) | BIT6(25) | BIT5(24) | BIT4(23) | BIT3(22) |
| 11 | Ireng/Putih | BIT9 (28) | BIT9 (28) | BIT8(27) | BIT7 (26) | BIT6(25) | BIT5(24) | BIT4(23) |
| 12 | Abang/Putih | BIT 10 (29) | BIT 10 (29) | BIT9 (28) | BIT8(27) | BIT7 (26) | BIT6(25) | BIT5(24) |
| 13 | Oranye / Putih | BIT 11 (211) | N/A |
|
|
|
|
|
| Garis Pelindung |
| GND |
|
|
|
|
| |
| Kode Order |
| ukuran |
Cathetan:
▶ Nganggo sambungan alus elastis bakal diterapake ing antarane poros encoder lan poros output ujung pangguna kanggo ngindhari karusakan saka sistem poros encoder amarga gerakan serial lan metu saka poros pangguna.
▶ Mangga digatekake beban poros sing diidini sajrone instalasi.
▶ Priksa manawa prabédan Antarane Axial Degree poros encoder lan poros output pangguna ora luwih saka 0.20mm, lan panyimpangan amba karo sumbu kudu kurang saka 1,5 °.
▶ Coba supaya ora nuthuk lan tiba tabrakan nalika instalasi;
▶Aja nyambungake kabel listrik lan kabel lemah kanthi mbalikke.
▶Kabel GND kudu kandel, umume luwih gedhe tinimbang φ 3.
▶ Garis output encoder ora kena tumpang tindih supaya ora ngrusak sirkuit output.
▶ Garis sinyal encoder ora bakal disambungake menyang sumber daya DC utawa arus AC supaya ora ngrusak sirkuit output.
▶Motor lan peralatan liyane sing disambungake menyang encoder kudu digarap kanthi apik tanpa listrik statis.
▶ Kabel shielded kudu digunakake kanggo kabel.
▶Sadurunge miwiti mesin, priksa manawa kabel kasebut bener.
▶ Sajrone transmisi jarak adoh, faktor atenuasi sinyal kudu dianggep, lan mode output kanthi impedansi output sing kurang lan kemampuan anti-interferensi sing kuwat bakal dipilih.
▶ Aja nggunakake ing lingkungan gelombang elektromagnetik kuwat.
Lima langkah supaya sampeyan ngerti carane milih encoder sampeyan:
1. Yen sampeyan wis nggunakake encoders karo merek liyane, please aran gratis kanggo ngirim kita informasi saka info account lan info encoder, kaya model no, etc, engineer kita bakal maringi pitutur sampeyan karo panggantos euqivalent kita ing kinerja biaya dhuwur;
2. Yen sampeyan pengin golek encoder kanggo aplikasi sampeyan, pilih dhisik jinis encoder: 1) Enkoder tambahan 2) Enkoder absolut 3) Gambar Sensor Kawat 4) Generator Pluse Manual
3. Pilih format output (NPN/PNP/LINE DRIVER/PUSH PULL kanggo incremental encoder) utawa antarmuka (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Pilih resolusi encoder, Max.50000ppr kanggo Gertech incremental encoder, Max.29bits kanggo Gertech Absolute Encoder;
5. Pilih omah Dia lan poros dia.saka encoder;
Gertech minangka panggantos sing padha karo produk manca sing padha kayata Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler, ETC.
Ganti Gertech Setara:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C, E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C, E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
Autonik: E30S, E40S, E40H, E50S, E50H, E60S, E60H Series
Rincian Kemasan
Encoder rotary dikempalken ing kemasan ekspor standar utawa kaya sing dikarepake para panuku;
FAQ:
Babagan Pangiriman:
Anjog wektu: Delivery bisa ing minggu sawise pembayaran lengkap dening DHL utawa logika liyane minangka saben dijaluk;
Babagan Pembayaran:
Pembayaran bisa ditindakake liwat transfer bank, serikat barat lan Paypal;
Kontrol kualitas:
Tim inspeksi kualitas profesional lan berpengalaman sing dipimpin dening Pak Hu, bisa njamin kualitas saben produk nalika ninggalake pabrik.Hu wis luwih saka 10 taun pengalaman ing industri encoders,
Babagan dhukungan teknik:
Tim teknik profesional lan berpengalaman sing dipimpin dening Dokter Zhang, wis ngrampungake akeh terobosan ing pangembangan encoders, kajaba saka encoder tambahan normal, Gertech saiki wis ngrampungake pembangunan Profinet, EtherCAT, Modbus-TCP lan Powe-rlink;
Sertifikat:
CE, ISO9001, Rohs lan KClagi ing proses;
Babagan Inquiry:
Sembarang pitakon bakal dijawab sajrone 24 jam, lan pelanggan uga bisa nambah apa app utawa wechat kanggo olahpesen cepet, tim marketing lan tim teknis bakal menehi layanan lan saran profesional;
Kebijakan jaminan:
Gertech nawakake garansi 1 taun lan dhukungan teknis seumur hidup;
We are kene kanggo bantuan.Insinyur lan ahli encoder kita bakal nanggapi kanthi cepet kanggo pitakonan encoder paling angel lan paling teknis.
Expedite options are available on many models. Contact us for details:Terry_Marketing@gertechsensors.com;
-
GSA-C Series CANopen Single Turn Bus-based Abso...
-
GMA-PN Series Profinet Interface Ethernet Multi...
-
GMA-M Series Modbus Bus-based Multi-Turn Absolu...
-
GSA-A Series Single-Turn Analog Absolute Rotary...
-
GSA-M Series Single Nguripake Modbus Absolute Encoder
-
GMA-MT Series Modbus-TCP Antarmuka Ethernet Mul...
