GMA-B Series BISS Multiturn Absolute Encoder
GMA-B Series BISS Multiturn Absolute Encoder
GMA-B Series encoder bụ ihe ngbanwe BISS nwere ọtụtụ ntụgharị zuru oke.BiSS-C bụ ụdị BiSS kachasị ọhụrụ.Ụdị ochie (BiSS-B) adịkwaghị adị.BiSS-C bụ ngwaike dakọtara na ọkọlọtọ SSI mana n'ime usoro data nke ọ bụla nna ukwu na-amụta ma kwụọ ụgwọ maka igbu oge ahịrị na-enyere ọnụego data 10 Mbit/s na ogologo eriri ruru mita 100.Data sensọ nwere ike ịgụnye ọtụtụ "ọwa" ka enwere ike ibunye ma ozi ọnọdụ yana ọkwa n'otu etiti.BiSS-C na-eji CRC dị ike karị (Ihe Okike) maka ịchọpụta njehie nnyefe. Housing Dia.: 38,50,58mm;Osisi siri ike/ oghereOgologo: 6,8,10mm;Mkpebi: Otu ntụgharị max.1024ppr/max.2048ppr;Interface:Biss;Koodu mmepụta: ọnụọgụ abụọ, isi awọ, oke isi awọ, BCD;
Asambodo: CE,ROHS,KC,ISO9001
Oge ndu:N'ime otu izu mgbe ịkwụ ụgwọ zuru ezu;Nnyefe site na DHL ma ọ bụ ndị ọzọ dị ka a tụlere;
▶ Ogologo Ụlọ: 58mm;
▶ Ogologo ogwe osisi siri ike / oghere: 10mm;
▶Interface: BISS;
▶ Mkpebi: Max.16bits, Otu ntụgharị max.16bits, ngụkọta Max.29bits;
▶ Voltage na-ebunye: 5v, 8-29v;
▶ Koodu mmepụta: ọnụọgụ abụọ, isi awọ, ;
▶ A na-eji ya n'ọtụtụ ebe dị iche iche nke njikwa akpaaka na sistemu nha, dị ka nrụpụta igwe, mbupu, textile, mbipụta, ụgbọ elu, ụlọ ọrụ agha igwe nyocha, igwe mbuli, wdg.
▶Vibration-eguzogide, corrosion-eguzogide, mmetọ-eguzogide;
| Njirimara ngwaahịa | |||||
| Ụlọ Dia.: | 58mm | ||||
| Shaft siri ike: | 10mm | ||||
| Data Eletriki | |||||
| Mkpebi: | Max.16bits, Otu ntụgharị max.16bits, ngụkọta Max.29bits | ||||
| Ihuenyo: | BISS/NPN/PNP onye nchịkọta oghe; | ||||
| Koodu mmepụta: | ọnụọgụ abụọ, isi awọ, oke isi awọ, BCD | ||||
| Voltaji na-eweta: | 8-29V | ||||
| Oke.Nzaghachi ugboro ugboro | 30Khz | ||||
| Ntuziaka Rotary | ccw | cw | |||
| Mpụta | Usoro mmepụta | NPN Open Collector | PNP Open Collector | ||
| Mpụta Logic | Ezi uche | Echiche ọjọọ | |||
| Voltaji fọdụrụnụ | Io=16mA | ≤0.4v | |||
| Io=32mA | ≤1.5v | ||||
| Ugbu a | 32mA kacha | ||||
| MechanicalData | |||||
| Malite Torque | 0.01N•M | ||||
| Oke.Nbudata Shaft | Axial: 5-30N, Radial: 10-20N; | ||||
| Oke.Ọsọ Rotary | 3000rpm | ||||
| Ibu | 160-200 g | ||||
| Data gburugburu | |||||
| Okpomọkụ na-arụ ọrụ. | -30 ~ 80 ℃ | ||||
| Okpomọkụ nchekwa. | -40 ~ 80 ℃ | ||||
| Ọkwa nchekwa | IP54 | ||||
| Isi njikọ (1): | |||||||
| Ntụtụ | Agba | Mkpebi | |||||
| 1024 | 512 | 256/180 | 128/90 | 64 | 32 | ||
| 1 | Acha anụnụ anụnụ | 0V | 0V | ||||
| 2 | Agba aja aja | 8V-29V | 8V-29V | ||||
| 3 | Nwa | BIT1 (20) | N/A | ||||
| 4 | Uhie | BIT2 (21) | BIT1 (20) | N/A | |||
| 5 | oroma | BIT3 (22) | BIT2 (21) | BIT1 (20) | N/A | ||
| 6 | Odo | BIT4 (23) | BIT3 (22) | BIT2 (21) | BIT1 (20) | N/A | |
| 7 | Akwụkwọ ndụ akwụkwọ ndụ | BIT5 (24) | BIT4 (23) | BIT3 (22) | BIT2 (21) | BIT1 (20) | N/A |
| 8 | Purple | BIT6 (25) | BIT5 (24) | BIT4 (23) | BIT3 (22) | BIT2 (21) | BIT1 (20) |
| 9 | Agba ntụ | BIT7 (26) | BIT6 (25) | BIT5 (24) | BIT4 (23) | BIT3 (22) | BIT2 (21) |
| 10 | Ọcha | BIT8 (27) | BIT7 (26) | BIT6 (25) | BIT5 (24) | BIT4 (23) | BIT3 (22) |
| 11 | Oji/Ọcha | BIT9 (28) | BIT8 (27) | BIT7 (26) | BIT6 (25) | BIT5 (24) | BIT4 (23) |
| 12 | Uhie/Ọcha | BIT10 (29) | BIT9 (28) | BIT8 (27) | BIT7 (26) | BIT6 (25) | BIT5 (24) |
| 13 | Acha anụnụ anụnụ/Ọcha | Ntọgharị efu | |||||
| Ahịrị nchekwa | GND | ||||||
| Ntụtụ | Agba | Mkpebi | ||||||
| 2048 | 1024/720 | 512/360 | 256/180 | 128 | 64 |
| ||
| 1 | Acha anụnụ anụnụ | 0V | 0V | |||||
| 2 | Agba aja aja | 8V-29V | 8V-29V | |||||
| 3 | Nwa | BIT1 (20) | BIT1 (20) | N/A | ||||
| 4 | Uhie | BIT2 (21) | BIT2 (21) | BIT1 (20) | N/A | |||
| 5 | oroma | BIT3 (22) | BIT3 (22) | BIT2 (21) | BIT1 (20) | N/A | ||
| 6 | Odo | BIT4 (23) | BIT4 (23) | BIT3 (22) | BIT2 (21) | BIT1 (20) | N/A | |
| 7 | Akwụkwọ ndụ akwụkwọ ndụ | BIT5 (24) | BIT5 (24) | BIT4 (23) | BIT3 (22) | BIT2 (21) | BIT1 (20) | N/A |
| 8 | Purple | BIT6 (25) | BIT6 (25) | BIT5 (24) | BIT4 (23) | BIT3 (22) | BIT2 (21) | BIT1 (20) |
| 9 | Agba ntụ | BIT7 (26) | BIT7 (26) | BIT6 (25) | BIT5 (24) | BIT4 (23) | BIT3 (22) | BIT2 (21) |
| 10 | Ọcha | BIT8 (27) | BIT8 (27) | BIT7 (26) | BIT6 (25) | BIT5 (24) | BIT4 (23) | BIT3 (22) |
| 11 | Oji/Ọcha | BIT9 (28) | BIT9 (28) | BIT8 (27) | BIT7 (26) | BIT6 (25) | BIT5 (24) | BIT4 (23) |
| 12 | Uhie/Ọcha | BIT10 (29) | BIT10 (29) | BIT9 (28) | BIT8 (27) | BIT7 (26) | BIT6 (25) | BIT5 (24) |
| 13 | oroma/Ọcha | BIT11 (211) | N/A | |||||
| Ahịrị nchekwa | GND | |||||||
| Koodu ịtụ |
| Akụkụ |
Nzọụkwụ ise na-eme ka ị mara ka ị ga-esi họrọ koodu ntinye gị:
1.If ị na-ama na-eji encoders na ndị ọzọ ụdị, plz na-eche free iziga anyị ozi nke ika info na encoder info, dị ka nlereanya mba, wdg, anyị engineer ga-enye ndụmọdụ gị na anyị euqivalent nnọchi na a elu na-eri arụmọrụ;
2.Ọ bụrụ na ịchọrọ ịchọta koodu ntinye maka ngwa gị, plz buru ụzọ họrọ ụdị koodu ntinye: 1) ntinye ntinye 2) ihe mkpuchi zuru oke 3) Dọrọ Sensọ Wire 4) Manual Pluse Generator
3. Họrọ usoro mmepụta gị (NPN/PNP/LINE DRIVER/PUSH PULL for incremental encoder) ma ọ bụ interfaces (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Họrọ mkpebi nke encoder, Max.50000ppr maka Gertech incremental encoder, Max.29bits maka Gertech Absolute Encoder;
5. Họrọ ebe obibi Dia na shaft dia.nke koodu;
Gertech bụ onye nnọchi anya nha anya maka ngwaahịa si mba ọzọ dị ka Sick / Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.
Gertech Equivalent dochie:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
Autonics: E30S, E40S, E40H, E50S, E50H, E60S, E60H Series
Nkọwa nkwakọ ngwaahịa
A na-akwakọba ihe ngbanwe rotary na nkwakọ ngwaahịa mbupụ ọkọlọtọ ma ọ bụ dị ka ndị na-azụ ahịa chọrọ;
Nzọụkwụ ise na-eme ka ị mara ka ị ga-esi họrọ koodu ntinye gị:
1.If ị na-ama na-eji encoders na ndị ọzọ ụdị, plz na-eche free iziga anyị ozi nke ika info na encoder info, dị ka nlereanya mba, wdg, anyị engineer ga-enye ndụmọdụ gị na anyị euqivalent nnọchi na a elu na-eri arụmọrụ;
2.Ọ bụrụ na ịchọrọ ịchọta koodu ntinye maka ngwa gị, plz buru ụzọ họrọ ụdị koodu ntinye: 1) ntinye ntinye 2) ihe mkpuchi zuru oke 3) Dọrọ Sensọ Wire 4) Manual Pluse Generator
3. Họrọ usoro mmepụta gị (NPN/PNP/LINE DRIVER/PUSH PULL for incremental encoder) ma ọ bụ interfaces (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Họrọ mkpebi nke encoder, Max.50000ppr maka Gertech incremental encoder, Max.29bits maka Gertech Absolute Encoder;
5. Họrọ ebe obibi Dia na shaft dia.nke koodu;
Gertech bụ onye nnọchi anya nha anya maka ngwaahịa si mba ọzọ dị ka Sick / Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.
Gertech Equivalent dochie:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
Autonics: E30S, E40S, E40H, E50S, E50H, E60S, E60H Series
Nkọwa nkwakọ ngwaahịa
A na-akwakọba ihe ngbanwe rotary na nkwakọ ngwaahịa mbupụ ọkọlọtọ ma ọ bụ dị ka ndị na-azụ ahịa chọrọ;
Ajụjụ:
1) Kedu otu esi ahọrọ koodu nzuzo?
Tupu ịtụ koodu koodu, ị nwere ike mara nke ọma ụdị koodu ị nwere ike ịchọ.
Enwere koodu ntinye agbakwunyere na koodu nzuzo zuru oke, mgbe nke a gasịrị, ngalaba ọrụ ire ahịa ga-abara gị uru.
2) Kedu nkọwapụta arịrịọsted tupu ịtụ koodu koodu?
Ụdị ihe nnochita—————-osisi siri ike ma ọ bụ ihe nkpuchi oghere oghere
Dayameta Mpụga———-Nkeji 25mm, MAX 100mm
Oghere Oghere—————Ogwe Obere 4mm, Ogwe kacha 45mm
Usoro & Mkpebi———Nkeji 20ppr, MAX 65536ppr
Ọnọdụ mmepụta sekit --- ị nwere ike ịhọrọ NPN, PNP, Voltage, Push-pull, Line ọkwọ ụgbọ ala, wdg.
Voltaji na-enye ike——DC5V-30V
3) Otu esi ahọrọ koodu nzuzo ziri ezi site n'onwe gị?
Nkọwa nkọwa kpọmkwem
Lelee akụkụ nwụnye
Kpọtụrụ onye na-eweta ngwaahịa ka ị nweta nkọwa ndị ọzọ
4) Iberibe ole ka ịmalite?
MOQ bụ 20pcs. Obere obere dịkwa mma ma ibu dị elu.
5) Gịnị mere họrọ "Gertech” Ihe mkpuchi ika?
Ndị otu injinia nke anyị chepụtara ma mepụta koodu ntinye niile kemgbe afọ 2004, a na-ebubatakwa ọtụtụ akụrụngwa eletrọnịkị nke koodu n'ahịa si mba ofesi.Anyị nwere ụlọ ọrụ Anti-static na enweghị uzuzu na ngwaahịa anyị gafere ISO9001.Ekwela ka àgwà anyị daa, n'ihi na àgwà bụ omenala anyị.
6) Ogologo oge ole ka oge ndu gị dị?
Oge ụzọ dị mkpirikpi - ụbọchị 3 maka ihe nlele, ụbọchị 7-10 maka mmepụta oke
7) kedu ihe bụ amụma nkwa gị?
Akwụkwọ ikike 1 afọ na nkwado teknụzụ ogologo ndụ
8) Gịnị bụ uru ma ọ bụrụ na anyị na-aghọ gị gị n'ụlọnga?
Ọnụ ahịa pụrụ iche, nchebe ahịa na nkwado.
9) Kedu usoro iji bụrụ ụlọ ọrụ Gertech?
Biko zitere anyị ajụjụ, anyị ga-akpọtụrụ gị ozugbo enwere ike.
10) Gịnị bụ gị mmepụta ike?
Anyị na-emepụta 5000pcs kwa izu. Ugbu a, anyị na-ewu nke abụọ nkebi ahịrịokwu mmepụta akara.
