GMA-DP Series Profibus-DP Interface Bus-based Absolute Encoder
GMA-DP Series encoder ke Profibus-DP interface multi turns absolute encoder, e fana ka tharollo ea max.29bits, with Housing Dia.:58mm;Solid Shaft Dia.:10mm, Supply Voltage:5v,8-29v, bese ea PROFIBUS e ne e le bese ea pele ea machaba, e bulehileng ea mohlahisi e ikemetseng bakeng sa ho aha, ho etsa le ho sebetsa ka boits'oaro (ho latela EN 50170).Ho na le mefuta e meraro e fapaneng: Profibus FMS, Profibus PA le Profibus DP.Profibus FMS (Tlhaloso ea Molaetsa oa Fieldbus) e loketse phapanyetsano ea data e shebaneng le ntho sebakeng sa sele le sa tšimo.Profibus PA (Process automation) e phethahatsa kopo ea indasteri ea ts'ebetso 'me e ka sebelisoa bakeng sa sebaka se sireletsehileng sa kahare le se seng se bolokehileng.Mofuta oa DP (decentral peripherie) ke oa phapanyetsano ea data e potlakileng lebaleng la ho aha le ho etsa li-automation.Li-encoder tsa POSITAL Profibus li loketse sebaka sena.
Setifikeiti: CE, ROHS, KC, ISO9001
Nako ea ho etella pele:Nakong ea beke ka mor'a tefo e feletseng;Ho tsamaisoa ke DHL kapa tse ling joalo ka ha ho boletsoe;
▶Bokahare ba Matlo: 58mm;
▶Bokahare ba Shaft e tiileng / e sekoti: 10mm;
▶Sephetho:Profibus-DP;
▶Qeto: Multi-turn Max.12bits e reteleha, Single Turn Max.13bits;
▶Supply Voltage: 5v,8-29v;
▶ E sebelisoa haholo mafapheng a fapaneng a taolo ea boiketsetso le mokhoa oa ho metha, joalo ka ho etsa mechini, ho tsamaisa thepa, masela, khatiso, lifofane, mochini oa liteko oa indasteri ea sesole, lifti, jj.
▶Ha e thothomele, e hana ho bola, e thibela tšilafalo;
| Litšobotsi tsa sehlahisoa | |
| Dia ya Matlo.: | 58 limilimithara |
| Solid Shaft Dia.: | 10 limilimithara |
| Lintlha tsa Motlakase | |
| Qeto: | Max.16bits, Single turn max.16bits, Total Max.29bits |
| Sehokelo: | Profibus-DP |
| Phepelo ea Voltage: | 8-29V |
| Max.Karabelo ea Khafetsa | 30Khz |
| MechiniLintlha | |
| Qala Torque | 0.01N•M |
| Max.Shaft Loading | Axial: 5-30N, Radial: 10-20N; |
| Max.Lebelo la Rotary | 6000rpm |
| Boima ba 'mele | 160-200 g |
| Lintlha tsa Tikoloho | |
| Mocheso o sebetsang. | -30 ~ 80 ℃ |
| Mocheso oa polokelo. | -40 ~ 80 ℃ |
| Mophato wa Tshireletso | IP65 |
| Khoutu ea ho Odara |
| Litekanyo |
Hlokomela:
▶ Adopt elastic soft connection e tla sebelisoa lipakeng tsa encoder shaft le output shaft ea qetellong ea mosebelisi ho qoba ts'enyo ea sistimi ea encoder shaft ka lebaka la motsamao oa serial le ho felloa ke mosebelisi.
▶ Ka kopo ela hloko mojaro o lumelletsoeng oa axle nakong ea ho kenya.
▶ Etsa bonnete ba hore phapang lipakeng tsa Axial Degree ea encoder shaft le user output shaft e se fete 0.20mm, le ho kheloha. angle le axis e tla ba ka tlaase ho 1.5 °.
▶ Leka ho qoba ho thulana le ho oela nakong ea ho kenya;
▶ Se ke oa hokela mohala oa motlakase le terata ea fatše ka morao.
▶ Mohala oa GND o tla ba tenya ka hohle kamoo ho ka khonehang, ka kakaretso o be moholo ho feta φ 3.
▶Methalo ea lintho tse tsoang ho khouto ha ea lokela ho tenyetseha ho qoba ho senya potoloho ea liphetho.
▶ Mohala oa lets'oao la khouto ha oa lokela ho hokeloa ho phepelo ea motlakase ea DC kapa AC ho qoba ho senya potoloho ea tlhahiso.
▶ Enjene le lisebelisoa tse ling tse hoketsoeng ho encoder li tla theoa hantle ntle le motlakase o tsitsitseng.
▶ Ho tla sebelisoa cable e sirelelitsoeng bakeng sa ho thaepa.
▶ Pele o qala mochini, hlahloba ka hloko hore na mohala o nepahetse.
▶ Nakong ea phetisetso ea nako e telele, ntlha ea ho fokotsa matšoao e tla nkoa, 'me mokhoa oa tlhahiso o nang le impedance e fokolang ea tlhahiso le matla a matla a ho thibela ho kena-kenana o tla khethoa.
▶ Qoba ho sebelisa tikoloho e matla ea maqhubu a motlakase.
Mehato e mehlano e tla u tsebisa mokhoa oa ho khetha encoder ea hau:
1.Haeba u se u sebelisitse li-encoder tse nang le mefuta e meng, plz ikutloe u lokolohile ho re romella lintlha tsa lintlha tsa mofuta le lintlha tsa encoder, joalo ka mohlala no, joalo-joalo, moenjiniere oa rona o tla u eletsa ka phetisetso ea rona e theko e phahameng haholo;
2.Haeba u batla ho fumana sekhoudara sesebelisoa sa hau, plz khetha pele mofuta oa encoder: 1) Encoder e eketsang 2) Encoder e felletseng 3) Draw Wire Sensors 4) Manual Pluse Jenereithara.
3. Khetha sebopeho sa hau sa tlhahiso (NPN/PNP/LINE DRIVER/PUSH PULL bakeng sa encoder e eketsehileng) kapa li-interfaces (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Khetha qeto ea encoder, Max.50000ppr bakeng sa Gertech incremental encoder, Max.29bits bakeng sa Gertech Absolute Encoder;
5. Khetha ea matlo Dia le shaft dia.ea encoder;
Gertech ke phetisetso e tšoanang e tsebahalang ea lihlahisoa tse tšoanang tsa kantle ho naha joalo ka Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.
Gertech Equivalent nkela sebaka:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
Autonics: E30S, E40S, E40H,E50S, E50H, E60S, E60H Series
Lintlha tsa Sephutheloana
Rotary encoder e kentsoe ka har'a sephutheloana se tloaelehileng sa kantle ho naha kapa joalo ka ha ho hlokoa ke bareki;
LBH:
1) U ka khetha encoder joang?
Pele o odara li-encoder, o ka tseba ka ho hlaka hore na o hloka mofuta ofe oa encoder.
Ho na le li-encoder tse ntseng li eketseha le li-encoder tse felletseng, kamora sena, lefapha la rona la litšebeletso tsa thekiso le ka u sebeletsa hamolemo.
2) Litlhaloso ke life requested pele o laela encoder?
Mofuta oa encoder——————-solid shaft kapa hollow shaft encoder
Bophara ba ka Ntle———-Min 25mm, MAX 100mm
Shaft Diameter—————Min shaft 4mm, Max shaft 45mm
Mohato le Qeto———Min 20ppr, MAX 65536ppr
Circuit Output Mode——-o ka khetha NPN, PNP, Voltage, Push-pull, Line driver, jj.
Matla a Phepelo ea Matla——DC5V-30V
3) U ka khetha encoder e nepahetseng joang u le mong?
Hantle-ntle Tlhaloso
Sheba The Installation Dimensions
Ikopanye le Supplier ho fumana lintlha tse ling
4) Ho qala likotoana tse kae?
MOQ ke 20pcs .Boemo bo fokolang bo boetse bo lokile empa thepa e phahame.
5) Hobaneng u khetha "Gertech” Brand Encoder?
Li-encoder tsohle li entsoe le ho ntlafatsoa ke sehlopha sa rona sa boenjiniere ho tloha ka selemo sa 2004, 'me boholo ba likarolo tsa elektroniki tsa li-encoder li romelloa kantle ho naha ho tsoa 'marakeng oa mose ho maoatle.Re na le workshop ea Anti-static le e se nang lerōle mme lihlahisoa tsa rona li fetisa ISO9001.Le ka mohla u se ke ua theola boleng ba rona, hobane boleng ke moetlo oa rona.
6) Nako ea hau ea ho etella pele e telele hakae?
Nako e khutšoane ea ho etella pele - matsatsi a 3 bakeng sa disampole, matsatsi a 7-10 bakeng sa tlhahiso ea bongata
7) leano la hau la tiisetso ke eng?
Tiisetso ea selemo sa 1 le ts'ehetso ea tekheniki ea bophelo bohle
8) Melemo ke efe ha re ka ba setsi sa hau?
Litheko tse khethehileng, tšireletso ea 'maraka le tšehetso.
9) Mokhoa oa ho ba setsi sa Gertech ke ofe?
Ka kopo re romelle potso, re tla ikopanya le uena kapele kamoo ho ka khonehang.
10) Bokhoni ba hau ba tlhahiso ke bofe?
Re hlahisa 5000pcs beke le beke. Hona joale re ntse re haha mohala oa tlhahiso ea poleloana ea bobeli.
