GSA-M Rangatū Takitahi Takitahi Modbus Encoder Tino
GSA-M Rangatū Takitahi Takitahi Modbus Encoder Tino
GSA-MKo te encoder rangatū he huri noa i te pahiModbusencoder tino, ka taea e ia te whakarato max 16bits waiata-trun taumira, ki te kōwhiringa o te whare Dia.:38,50,58mm;He Maamaa/Hollow Shaft Diameter:6,8,10mm, Waehere Putanga: Binary, Grey, Gray Excess, BCD;Ngaohiko Whakarato: 5v,8-29v;MODBUShe kawa tono/whakautu me te tuku ratonga kua tohua e nga waehere mahi.MODBUSKo nga waehere mahi he huānga o te tono / whakautu PDU MODBUS.Ko te whainga o tenei tuhinga he whakaahua i nga waehere mahi i whakamahia i roto i te anga oMODBUShokohoko.MODBUShe kawa karere paparanga tono mo te whakawhitiwhiti korero a te kiritaki/tūmau i waenga i nga taputapu e hono ana i runga i nga momo pahi rereke ranei.
▶Tanenga Whare:38,50,58mm;
▶Soli/hollow Shaft Diameter:6,8,10mm;
▶Atanga: Modbus;
▶Whakatau: Kotahi te hurihanga max.16bits;
▶Ngaohiko Tukunga:5v,8-29v;
▶Waehere Huaputa: Arua, Kerei, Kerei Tawhetawhe, BCD;
▶Ka whakamahia nuitia i roto i nga momo waahi o te whakahaere aunoa me te punaha ine, penei i te hanga miihini, te kaipuke, te kakano, te ta, te rererangi, te umanga hoia Miihini whakamatautau, ararewa, aha atu.
▶Atete te wiri, te waikura, te parahanga;
| Nga ahuatanga hua | |||||
| Whare Whare.: | 38,50,58mm | ||||
| Te Taa o te Poro Totoi.: | 6,8,10mm | ||||
| Raraunga Hiko | |||||
| Whakatau: | Te huri kotahi max.16bits | ||||
| Atanga: | Modbus | ||||
| Hōputu Huaputa: | NPN/PNP kaikohi tuwhera, Push pull, Raina Atekōkiri; | ||||
| Ngaohiko Tukunga: | 8-29V | ||||
| Max.Whakautu Auautanga | 300Khz | ||||
| Tuwhera Kaikohi | Putanga Ngaohiko | Atekōkiri Raina | Pana Toia | ||
| Te kai o naianei | ≤80mA; | ≤80mA; | ≤150mA; | ≤80mA; | |
| Utaina o naianei | 40mA; | 40mA; | 60mA; | 40mA; | |
| VOH | Min.Vcc x 70%; | Min.Vcc – 2.5v | Min.3.4v | Min.Vcc – 1.5v | |
| VOL | Mōrahi.0.4v | Mōrahi.0.4v | Mōrahi.0.4v | Mōrahi.0.8v | |
| HangaiaRaraunga | |||||
| Tīmata Torque | 4 x 10-3N•M | ||||
| Max.Te Uta i te Shaft | Axial: 29.4N, Radial:19,6N; | ||||
| Max.Tere Rotary | 3000rpm | ||||
| Taumaha | 160-200g | ||||
| Raraunga Taiao | |||||
| Temp Mahi. | -30~80 ℃ | ||||
| Rokiroki Temp. | -40~80 ℃ | ||||
| Koeke Tiaki | IP54 | ||||
Whakataki Matua
♦Atanga Whakawhiti:RS-485.Tāpiri：1～254.（Ko te taunoa ko 01）
♦Reiti Baud：4800,9600（Taunoa），19200,38400.Whakawhitiwhiti
♦Waenga：STP.
♦Hōputu Tāpare Rā：1 moka timata, 8 moka Raraunga, 1 moka Parity, 1 moka mutu, Rere kore-mana.
Hōputu Karere:
1.Kupu whakahau(CW) 03H：Pānuitia te Uara Tauwāhi
Tono Matua(MASTRQ):Wāhitau| Kupu Whakahau| Wāhitau Tawhā| Roa Raraunga |Taki Waehere
Whakautu taurekareka:Wāhitau| Kupu Whakahau| Paita Roa| Uara Tawhā| Taki Waehere
2.Kupu whakahau(CW) 10H：Tautuhi Uara Turanga O Naianei
Tono Matua(MASTRQ):Wāhitau| Kupu Whakahau| Wāhitau Tawhā| Roa Raraunga| Paita Roa| Uara Tawhā| Taki Waehere
Whakautu Taurekareka：Wāhitau| Kupu Whakahau| Wāhitau Tawhā| Roa Raraunga |Taki Waehere
3.Kupu whakahau(CW) 06H：Tuhia te Uara Tawhā
Tono Matua(MASTRQ):Wāhitau| Kupu Whakahau| Wāhitau Tawhā| Uara Tawhā|Taki Waehere
Whakautu Taurekareka：Wāhitau| Kupu Whakahau| Wāhitau Tawhā| Uara Tawhā |Taki Waehere
Pānui Wāhi Uara:
Uara Tauwāhi Uiui Matua:01H 03H 00H 00H 00H 02H C4H 0BH
Tuhipoka：01H-Wāhitau|03H- Kupu Whakahau|00H 00H-Rēhita Wāhitau| 0H 02H-Raraunga Roa（Wae: Kupu）| C4H 0BH- Tirohanga CRC
Whakautu Taurekareka: 01H 03H 04H 01H F4H 00H 01H 7BH FDH
Tuhipoka：01H-Wāhitau|03H- Kupu Whakahau| 04H Roa Raraunga（Waeine: Paita）|01H F4H 00H 01H-Raraunga Tauwāhi |7BH FDH- CRC Tirohanga
Tautuhinga Tawhā (Ka whai mana i muri i te hihiko ano):
Rau Tawhā:
| Hexadecimal | Tawhā | Hexadecimal | Tawhā |
| 01 | 4800bps Reiti Baud | 05 | 115200Bps |
| 02 | 9600bps Reiti Baud | 00 | Karakakaka: Whakapiki Raraunga |
| 03 | 19200bps Reiti Baud | 01 | Atikakaraka: Whakaheke Raraunga |
| 04 | 38400bps Reiti Baud |
Tuhipoka 
1).Rēhita Wāhitau 0044H, Roa 0001H, Raraunga Paita Teitei Whakamaua hei 00H，Paita Iti hei Huri ID；
(2) Wāhitau Rēhita 0045H, Roa 0001H, Paita Teitei Raraunga Kua Utuhia hei 00H，Paita Iti hei Reiti Baud；
(3) Rēhita Wāhitau 0046H, Roa 0001H, Raraunga Paita Teitei Whakamaua hei 00H，Paita Iti ka Tatau Ahunga;
(4).Wāhitau Rēhita 004AH, Roa 0002H, E wha nga paita mai i Teitei ki te iti ka tatūkē onāianei Uara Wāhi (Tuhipoka kia kaua e hipa atu i te tepe tūnga tinana)；
Tauira Huri Tawhā:
a.Huri ID（01H ki 02H）：
Tukunga Matua:01H 06H 00H 44H 00H 02H 48H 1EH
Whakautu taurekareka:02H 06H 00H 44H 00H 02H 48H 2DH
Tuhipoka：01H-wāhitau |06H-kupu whakahau |00H 44H-Rigester Wāhitau |00H 02H-Raraunga |48H 1EH-CRC Taki(48H 2DH-CRC Taki)
b.Hurihia te Reiti Baud (te huringa BR ki te 04H-38400bps):
Tukunga Matua:01H 06H 00H 45H 00H 04H 99H DCH
Whakautu taurekareka:01H 06H 00H 45H 00H 04H 99H DCH
Tuhipoka：01H-Wāhitau|06H-Kupu Tono|00H 45H-Rēhita Wāhitau|00H 04H-Raraunga|99H DCH- CRC Taki
c． Huri Aronga Tatau (Ahanga Tatau 01H-Ate-a-karaka，Me Tautuhia te Uara Wāhi o Naianei I muri i te Huringa)
Tukunga Matua:01H 06H 00H 46H 00H 01H A9H DFH
Whakautu taurekareka:01H 06H 00H 46H 00H 01H A9H DFH
Tuhipoka：01H-wāhitau|06H-kupu whakahau|00H 46H-Rēhita Wāhitau|00H 01H-Raraunga|A9H DFH- CRC Taki
d.Tautuhi Uara Tūnga Onāianei(turanga o naianei Huri uara ki te 00000000H)
Tukunga Matua:01H 10H 00H 4AH 00H 02H 04H 00H 00H 00H 00H 77H E0H
Tuhipoka：01H-wāhitau|10H-kupu whakahau|00H 4AH-rehita wāhitau|00H 02H-raunga roa（Wae:Word）|04H-Raraunga Roa（Wae: Paita）|00H 00H 00H 00H-Raraunga|77H
B5H- Tirohanga CRC
Whakautu taurekareka:01H 10H 00H 4AH 00H 02H 60H 1EH
Tuhipoka：01H-wāhitau|10H-kupu whakahau|00H 4AH-rehita wāhitau|00H 02H-raunga roa（Waeine:Word）A0H DCH-CRC ChecL
| Waehere Whakatau |
| Ahu |
E rima nga taahiraa e mohio ai koe me pehea te whiriwhiri i to encoder:
1.Mehemea kua whakamahia e koe nga encoders me etahi atu tohu, plz kia pai ki te tuku mai i nga korero mo te tohu tohu me nga korero encoder, penei i te tauira kore, me etahi atu, ka tohutohu to maatau miihini ki a koe me to maatau whakakapi euqivalent i te utu utu nui;
2.Mena kei te pirangi koe ki te kimi i tetahi encoder mo to tono, tohua tuatahi te momo encoder: 1) Incremental encoder 2) Absolute encoder 3) Draw Wire Sensors 4) Manual Pluse Generator
3. Whiriwhiria to whakatakotoranga whakaputa(NPN/PNP/LINE DRIVER/PUSH PULL mo te encoder incremental) me nga atanga (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Tīpakohia te taumira o te encoder, Max.50000ppr mo Gertech incremental encoder, Max.29bits mo Gertech Absolute Encoder;
5. Tīpakohia te Dia whare me te dia pou.o te encoder;
Ko Gertech he whakakapinga rite mo nga hua kee penei i a Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.
Whakakapi Gertech Ōrite:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Rangatū
Autonics: E30S, E40S, E40H,E50S, E50H, E60S, E60H Series
Nga Taipitopito mokete
Ko te encoder hurihuri kua kikii ki roto i nga kohinga kaweake paerewa, e hiahiatia ana ranei e nga kaihoko;
FAQ:
Mō te Tukunga:
Te wa arahi: Ka taea te tuku i roto i te wiki i muri i te utu katoa na te DHL me etahi atu arorau pera i te tono;
Mō te utu:
Ka taea te utu ma te whakawhiti putea, te uru o te uru me te Paypal;
Mana Kounga:
Ka taea e te roopu tirotiro kounga ngaio me te mohio ki a Mr. Hu te whakarite i te kounga o ia hua ka wehe atu i te wheketere.Mr.Neke atu i te 10 tau te wheako o Hu i roto i nga umanga o nga kaitahuri,
Mo te tautoko hangarau:
Ko te roopu hangarau ngaio me te tohunga mohio i arahihia e Doctor Zhang, he maha nga waahanga kua tutuki i roto i te whakawhanaketanga o nga encoders, haunga nga encoder taapiri noa, kua oti i a Gertech te mahi a Profinet, EtherCAT, Modbus-TCP me te whanaketanga Powe-rlink;
Tiwhikete:
CE, ISO9001, Rohs me KCkei te whakahaeretia;
Mō Uiuitanga:
Ko nga patai ka whakautuhia i roto i nga haora 24, ka taea hoki e te kaihoko te taapiri he aha te taupānga, wechat ranei mo te Karere Inamata, ma ta maatau roopu hokohoko me te roopu hangarau e tuku ratonga ngaio me nga whakaaro;
Kaupapa here whakamana:
Ka tukuna e Gertech he raihana 1 tau me te tautoko hangarau mo te wa roa;
Kei konei matou ki te awhina.Ka tere te whakautu a o maatau miihini me nga tohunga encoder ki o patai tino uaua, tino hangarau hoki.
Expedite options are available on many models. Contact us for details:Terry_Marketing@gertechsensors.com;
