GMA-M Series Modbus Bus-based Multi-Turn Absolute Encoder
GMA-M Series Modbus Bus-based Multi-Turn Absolute Encoder
GMA-M Series encoder e sebetsa ka libese tse ngataModbusencoder e felletseng, e ka fana ka qeto e phahameng ea 16bits, e nang le likhetho tsa matlo Dia.:38,50,58mm;Sekhahla sa Shaft se tiileng / sekoti: 6,8,10mm, Khoutu ea Output: Binary, Gray, Gray Excess, BCD;Phepelo ea Voltage: 5v,8-29v;MODBUS ke protocol ea kopo/karabo mme e fana ka lits'ebeletso tse boletsoeng ke likhoutu tsa ts'ebetso.Likhoutu tsa tšebetso tsa MODBUS ke likarolo tsa likopo tsa MODBUS/karabo tsa li-PDU.Sepheo sa tokomane ena ke ho hlalosa mekhoa ea ts'ebetso e sebelisoang ka har'a moralo oa litšebelisano tsa MODBUS.MODBUS ke protocol ea melaetsa ea lera ea ts'ebeliso bakeng sa puisano ea bareki / seva lipakeng tsa lisebelisoa tse hokahantsoeng ka mefuta e fapaneng ea libese kapa marang-rang.
Setifikeiti: CE, ROHS, KC, ISO9001
Nako ea ho etella pele:Nakong ea beke ka mor'a tefo e feletseng;Ho tsamaisoa ke DHL kapa tse ling joalo ka ha ho boletsoe;
▶Bokahare ba Matlo: 38,50,58mm;
▶Bokahare ba Shaft e tiileng/e sekoti:6,8,10mm;
▶ Sehokelo: Modbus;
▶Qeto: Max.16bits, Phetoho e le 'ngoe max.16bits, Total Max.29bits;
▶Supply Voltage: 5v,8-29v;
▶Output Code: Binary, Gray, Gray Excess, BCD;
▶ E sebelisoa haholo mafapheng a fapaneng a taolo ea boiketsetso le mokhoa oa ho metha, joalo ka ho etsa mechini, ho tsamaisa thepa, masela, khatiso, lifofane, mochini oa liteko oa indasteri ea sesole, lifti, jj.
▶Ha e thothomele, e hana ho bola, e thibela tšilafalo;
| Litšobotsi tsa sehlahisoa | |||||
| Dia ya Matlo.: | 38,50,58mm | ||||
| Solid Shaft Dia.: | 6,8,10mm | ||||
| Lintlha tsa Motlakase | |||||
| Qeto: | Max.16bits, Single turn max.16bits, Total Max.29bits | ||||
| Sehokelo: | Modbus | ||||
| Sebopeho sa Output: | NPN/PNP mokelli ea bulehileng, Push pull, Line Driver; | ||||
| Phepelo ea Voltage: | 8-29V | ||||
| Max.Karabelo ea Khafetsa | 300Khz | ||||
| Open Collector | Motlakase oa Motlakase | Mokhanni oa Line | Sututsa Hula | ||
| Ts'ebeliso ea hona joale | ≤80mA; | ≤80mA; | ≤150mA; | ≤80mA; | |
| Laola hona joale | 40mA; | 40mA; | 60mA; | 40mA; | |
| VOH | Min.Vcc x 70%; | Min.Vcc - 2,5v | Min.3.4v | Min.Vcc - 1.5v | |
| TLHOKOMELO | Max.0.4v | Max.0.4v | Max.0.4v | Max.0.8v | |
| MechiniLintlha | |||||
| Qala Torque | 4 x 10-3N•M | ||||
| Max.Shaft Loading | Axial: 29,4N, Radial:19,6N; | ||||
| Max.Lebelo la Rotary | 3000rpm | ||||
| Boima ba 'mele | 160-200 g | ||||
| Lintlha tsa Tikoloho | |||||
| Mocheso o sebetsang. | -30 ~ 80 ℃ | ||||
| Mocheso oa polokelo. | -40 ~ 80 ℃ | ||||
| Mophato wa Tshireletso | IP54 | ||||
Selelekela sa Sehlooho
♦Sebopeho sa Phetiso:RS-485.Eketsa: 1 - 254.Ka ho sa feleng ke 01）
♦Baud Rate:48009600 (Default)19200,38400.Puisano
♦MaharengTlhaloso: STP.
♦Sebopeho sa Foreimi ea Letsatsi: 1 qala hanyane, 8 Binyane ea data, 1 Esita le Parity bit, 1 stop bit, Phallo e sa laoleheng.
Sebopeho sa Molaetsa:
1.Lentsoe la taelo(CW) 03H: Bala Boleng ba Sebaka
Kopo e kholo (MASTRQ):Aterese| Laela Lentswe| Aterese ea Paramethara| Bolelele ba Boitsebiso |Hlahloba Khoutu
Karabo ea Lekhoba:Aterese| Laela Lentswe| Bolelele ba Byte| Litekanyetso tsa Paramethara| Hlahloba Khoutu
2.Lentsoe la taelo(CW) 10H: Preset Boleng ba Boemo ba Hona Joale
Kopo e kholo (MASTRQ):Aterese| Laela Lentswe| Aterese ea Paramethara| Bolelele ba Lintlha| Bolelele ba Byte| Litekanyetso tsa Paramethara| Hlahloba Khoutu
Karabelo ea Lekhoba:Aterese| Laela Lentswe| Aterese ea Paramethara| Bolelele ba Boitsebiso |Hlahloba Khoutu
3.Lentsoe la taelo(CW) 06H: Ngola Boleng ba Parameter
Kopo e kholo (MASTRQ):Aterese| Laela Lentswe| Aterese ea Paramethara| Boleng ba Paramethara|Hlahloba Khoutu
Karabelo ea Lekhoba:Aterese| Laela Lentswe| Aterese ea Paramethara| Boleng ba Paramethara |Hlahloba Khoutu
Bala Boleng ba Sebaka:
Potso ea Bohlokoa Boleng ba Sebaka:01H 03H 00H 00H 00H 02H C4H 0BH
Hlokomela:01H-Aterese|03H-Laela Lentsoe|00H 00H-Ngolisa Aterese| 0H 02H-Bolelele ba data (Yuniti: Lentsoe)| C4H 0BH- CRC Hlahloba
Karabo ea Lekhoba: 01H 03H 04H 01H F4H 00H 01H 7BH FDH
Hlokomela:01H-Aterese|03H-Laela Lentsoe| 04H Bolelele ba Boitsebiso (Yuniti: Byte)|01H F4H 00H 01H-Boitsebiso ba Sebaka |7BH FDH- CRC Hlahloba
Tlhophiso ea Paramethara (E sebetsa ka mor'a ho matlafatsa hape):
Letlapa la Parameter:
| Hexadecimal | Paramethara | Hexadecimal | Paramethara |
| 01 | 4800bps sekhahla sa Baud | 05 | 115200Bps |
| 02 | 9600bps Baud Rate | 00 | Nako ea ho tsamaea: Keketso ea Lintlha |
| 03 | 19200bps Baud Rate | 01 | Anticlockwise: Data Fokotsa |
| 04 | 38400bps Baud Rate |
Hlokomela 
1).Ngolisa Aterese 0044H, Length 0001H, Data High Byte e Tsitsitseng ho ba 00H，Low Byte e tla Fetola ID;
(2) .Ngolisa Aterese 0045H, Length 0001H, Data High Byte Fixed ho ba 00H，Low Byte ho ba Baud Rate;
(3).Ngolisa Aterese 0046H, Length 0001H, Data High Byte e Tsitsitseng ho ba 00H，Low Byte be Counting Direction;
(4) .Ngolisa Aterese 004AH, Length 0002H, Li-byte tse 'nè ho tloha Holimo ho ea tlaase e be Boleng ba Sebaka se seng se setiloe (Hlokomela ho se Fete moeli oa boemo ba 'mele);
Mohlala oa ho fetola parameter:
a.Fetola ID (01H ho 02H):
Master Send:01H 06H 00H 44H 00H 02H 48H 1EH
Karabo ea Lekhoba:02H 06H 00H 44H 00H 02H 48H 2DH
Hlokomela:01H-aterese |06H-taelo lentsoe |00H 44H-Rigester Aterese |00H 02H-Lintlha |48H 1EH-CRC Hlahloba(48H 2DH-CRC Hlahloba)
b.Fetola sekhahla sa Baud (BR fetoha ho ba 04H-38400bps):
Master Send:01H 06H 00H 45H 00H 04H 99H DCH
Karabo ea Lekhoba:01H 06H 00H 45H 00H 04H 99H DCH
Hlokomela:01H-Aterese|06H-Taelo Lentsoe|00H 45H-Ngolisa Aterese|00H 04H-Data|99H DCH- CRC Hlahloba
c． Fetola Taelo ya ho Bala (Tsheelo ya ho Bala 01H-Anti-wache,Boleng ba Sebaka sa Hona Jwale bo Lokela ho Bewa Ka mora Phetoho)
Monghali romela:01H 06H 00H 46H 00H 01H A9H DFH
Karabo ea Lekhoba:01H 06H 00H 46H 00H 01H A9H DFH
Hlokomela:01H-aterese|06H-lentsoe la taelo|00H 46H-Aterese ea Ngolisa|00H 01H-Data|A9H DFH- CRC Hlahloba
d.Beha Boleng ba Boemo ba Hona Joale(maemo a hajoale Phetoho ea boleng ho ba 00000000H)
Master Send:01H 10H 00H 4AH 00H 02H 04H 00H 00H 00H 00H 77H E0H
Hlokomela:01H-aterese|10H-taelo lentsoe|00H 4AH-ngodisa aterese|00H 02H-data bolelele (Unit:Word)|04H-Data Length(Unit:Byte)|00H 00H 00H 00H-Data|77H-Data|77H-Data|
B5H- CRC Hlahloba
Karabo ea Lekhoba:01H 10H 00H 4AH 00H 02H 60H 1EH
Hlokomela:01H-aterese|10H-taelo lentsoe|00H 4AH-ngolisa aterese|00H 02H-data bolelele (Unit:Word)A0H DCH-CRC ChecL
| Khoutu ea ho Odara |
| Litekanyo |
Mehato e mehlano e tla u tsebisa mokhoa oa ho khetha encoder ea hau:
1.Haeba u se u sebelisitse li-encoder tse nang le mefuta e meng, plz ikutloe u lokolohile ho re romella lintlha tsa lintlha tsa mofuta le lintlha tsa encoder, joalo ka mohlala no, joalo-joalo, moenjiniere oa rona o tla u eletsa ka phetisetso ea rona e theko e phahameng haholo;
2.Haeba u batla ho fumana sekhoudara sesebelisoa sa hau, plz khetha pele mofuta oa encoder: 1) Encoder e eketsang 2) Encoder e felletseng 3) Draw Wire Sensors 4) Manual Pluse Jenereithara.
3. Khetha sebopeho sa hau sa tlhahiso (NPN/PNP/LINE DRIVER/PUSH PULL bakeng sa encoder e ntseng e eketseha) kapa li-interfaces (Parallel, SSI, BISS, Modbus, CANopen, Profibus, DeviceNET, Profinet, EtherCAT, Power Link, Modbus TCP);
4. Khetha qeto ea encoder, Max.50000ppr bakeng sa Gertech incremental encoder, Max.29bits bakeng sa Gertech Absolute Encoder;
5. Khetha ea matlo Dia le shaft dia.ea encoder;
Gertech ke phetisetso e tšoanang e tsebahalang ea lihlahisoa tse tšoanang tsa kantle ho naha joalo ka Sick/Heidenhain/Nemicon/Autonics/ Koyo/Omron/Baumer/Tamagawa/Hengstler/Trelectronic/Pepperl+Fuchs/Elco/Kuebler,ETC.
Gertech Equivalent nkela sebaka:
Omron:
E6A2-CS3C, E6A2-CS3E, E6A2-CS5C, E6A2-CS5C,
E6A2-CW3C, E6A2-CW3E, E6A2-CW5C, E6A2-CWZ3C,
E6A2-CWZ3E, E6A2-CWZ5C;E6B2-CS3C, E6B2-CS3E, E6B2-CS5C, E6A2-CS5C,E6B2-CW3C, E6B2-CW3E, E6B2-CW5C, E6B2-CWZ3C,
E6B2-CWZ3E, E6B2-CBZ5C;E6C2-CS3C, E6C2-CS3E, E6C2-CS5C, E6C2-CS5C,E6C2-CW3C, E6C2-CW3E, E6C2-CW5C, E6C2-CWZ3C,
E6C2-CWZ3E, E6C2-CBZ5C;
Koyo: TRD-MX TRD-2E/1EH, TRD-2T, TRD-2TH, TRD-S, TRD-SH, TRD-N, TRD-NH, TRD-J TRD-GK, TRD-CH Series
Autonics: E30S, E40S, E40H,E50S, E50H, E60S, E60H Series
Lintlha tsa Sephutheloana
Rotary encoder e kentsoe ka har'a sephutheloana se tloaelehileng sa kantle ho naha kapa joalo ka ha ho hlokoa ke bareki;
LBH:
1) U ka khetha encoder joang?
Pele o odara li-encoder, o ka tseba ka ho hlaka hore na o hloka mofuta ofe oa encoder.
Ho na le li-encoder tse ntseng li eketseha le li-encoder tse felletseng, kamora sena, lefapha la rona la litšebeletso tsa thekiso le ka u sebeletsa hamolemo.
2) Litlhaloso ke life requested pele o laela encoder?
Mofuta oa encoder——————-solid shaft kapa hollow shaft encoder
Bophara ba ka Ntle———-Min 25mm, MAX 100mm
Shaft Diameter—————Min shaft 4mm, Max shaft 45mm
Mohato le Qeto———Min 20ppr, MAX 65536ppr
Circuit Output Mode——-o ka khetha NPN, PNP, Voltage, Push-pull, Line driver, jj.
Matla a Phepelo ea Matla——DC5V-30V
3) U ka khetha encoder e nepahetseng joang u le mong?
Hantle-ntle Tlhaloso
Sheba The Installation Dimensions
Ikopanye le Supplier ho fumana lintlha tse ling
4) Ho qala likotoana tse kae?
MOQ ke 20pcs .Boemo bo fokolang bo boetse bo lokile empa thepa e phahame.
5) Hobaneng u khetha "Gertech” Brand Encoder?
Li-encoder tsohle li entsoe le ho ntlafatsoa ke sehlopha sa rona sa boenjiniere ho tloha ka selemo sa 2004, 'me boholo ba likarolo tsa elektroniki tsa li-encoder li romelloa kantle ho naha ho tsoa 'marakeng oa mose ho maoatle.Re na le workshop ea Anti-static le e se nang lerōle mme lihlahisoa tsa rona li fetisa ISO9001.Le ka mohla u se ke ua theola boleng ba rona, hobane boleng ke moetlo oa rona.
6) Nako ea hau ea ho etella pele e telele hakae?
Nako e khutšoanyane ea ho etella pele - matsatsi a 3 bakeng sa lisampole, matsatsi a 7-10 bakeng sa tlhahiso ea bongata
7) leano la hau la tiisetso ke eng?
Tiisetso ea selemo sa 1 le ts'ehetso ea tekheniki ea bophelo bohle
8) Melemo ke efe ha re ka ba setsi sa hau?
Litheko tse khethehileng, tšireletso ea 'maraka le tšehetso.
9) Mokhoa oa ho ba setsi sa Gertech ke ofe?
Ka kopo re romelle potso, re tla ikopanya le uena kapele kamoo ho ka khonehang.
10) Bokhoni ba hau ba tlhahiso ke bofe?
Re hlahisa 5000pcs beke le beke. Hona joale re ntse re haha mohala oa tlhahiso ea poleloana ea bobeli.
